ページを印刷する
Chapter 6
Installing Operating Systems
Note
If no parameters are modified, the custom installation performs with the default parameters.
and
systems and downloads the drivers from the SCU boot media.
This section covers the custom installation procedures for the following operating systems:
•
•
•
Windows Server Operating System Installation
For unattended Windows Server operating system installation, follow these steps:
Step 1
To enter the unattended operating system installation function area, click OS Install in the left
navigation pane. The OS Install page appears.
Step 2
Click the Windows radio button and choose an operating system from the Operating System drop-down
list.
The Edition drop-down list appears.
Step 3
From the Edition drop-down list, choose an edition.
The Default Settings area and the Quick Install and Custom Install buttons appear.
Note
A progress bar displays indicating the tasks being performed and the percentage of completion. A new
OS Install page appears with the following list of collapsible windows:
•
•
•
•
A progress bar is displayed that indicates the tasks being performed and the percentage of completion.
An OS Install dialog box appears which prompts you to remove the UCS-SCU media and insert the
required operating system CD.
Step 6
Insert the operating system CD and click Ok.
The system reboots and installation of the operating system begins.
Table 6-3
displays the default parameters for the Windows and Red Hat Enterprise Linux operating
Windows Server Operating System Installation, page 6-7
The Windows Server 2008 R2 option in the drop-down list is the same for both Windows Server
2008 R2 and Windows Server 2008 R2 SP1. Depending on the installation CD used (Win2k8 R2
or Win2k8R2 SP1), the corresponding Windows OS version gets installed.
Personalization-To set the personalization settings, go to
page
6-8.
Personalization, page
Cisco UCS Server Configuration Utility, Release 5.0
Other OS Install
Table 6-2
6-8.
6-9.
6-10.
6-7