- ページ 2

サーバー Cisco UCS B200 M3のPDF インストールとサービスノートをオンラインで閲覧またはダウンロードできます。Cisco UCS B200 M3 28 ページ。 Blade server
Cisco UCS B200 M3 にも：インストレーション・マニュアル (34 ページ), インストールとサービスノート (36 ページ), インストールとサービスノート (37 ページ), マニュアル (8 ページ), アップグレードマニュアル (21 ページ)

Revised: August 28, 2019

Cisco UCS B200 M3 Blade Server

The Cisco UCS B200 M3 is an Intel-based, half-width blade supporting two CPU sockets using Intel E5-2600 series CPUs and up

to 24 DIMMs; it supports one modular LOM (dedicated slot for Cisco's Virtual Interface Card) and one mezzanine adapter. At this

time, the UCS B200 M2 (second generation) server is still available and is documented elsewhere. You can install up to eight UCS

B200 Blade Servers to a UCS chassis, mixing with other models or Cisco UCS blade servers in the chassis if desired.

Figure 1: Cisco UCS B200 M3 Front Panel

LEDs

Server LEDs indicate whether the blade server is in active or standby mode, the status of the network link, the overall health of the

blade server, and whether the server is set to give a blinking blue locator light from the locator button.

The removable drives also have LEDs indicating hard disk access activity and disk health.

Asset tag

Each server has a blank plastic

tag that pulls out of the front

panel which is provided so that

you can add your own asset

tracking label without

interfering with the intended air

flow.

Blade ejector handle

Ejector captive screw

Hard drive bay 1

Hard drive bay 2

Power button and LED

Network link status LED

Blade health LED

Console connector

Reset button access

Beaconing LED and button