- ページ 2

サーバー Cisco UCS B22 M3のPDF インストールとサービスノートをオンラインで閲覧またはダウンロードできます。Cisco UCS B22 M3 31 ページ。 Blade server
Cisco UCS B22 M3 にも：アップグレードマニュアル (21 ページ)

Revised: February 17, 2016, OL-27513-01

Cisco UCS B22 M3 Blade Server

The UCS B22 M3 blade server is a half-width blade with 12 DIMM slots; it supports one dedicated slot for Cisco's Virtual Interface

Card (VIC) 1240, and one open adapter slot. You may install up to eight UCS B22 Blade Servers to a UCS chassis, or mix with other

UCS blade servers. The Cisco UCS B22 M3 harnesses the power of the latest Intel Xeon processor E5-2400 product family with

expandability to 192 GB of RAM (using 12 x 16 GB DIMMs), 2 hot-plug drives, and 2 PCIe adapter slots for up to 80 Gigabit

Ethernet throughput.

Figure 1: Cisco UCS B22 Front Panel

Asset tag

Each server has a blank plastic asset tag that pulls out of

the front panel, provided so you can add your own asset

tracking label without interfering with the intended air

flow.

Blade ejector handle

Ejector captive screw

Hard drive bay 1

Hard drive bay 2

Power button and LED

Server LEDs indicate whether the blade server is in active or standby mode, the status of the network link, the overall health of the

blade server, and whether the server is set to give a blinking blue locator light from the locator button.

Network link status LED

Blade health LED

Console connector

Reset button access

Beaconing LED and button