- ページ 5

サーバー Cisco UCS C220 M4のPDF アップグレードマニュアルをオンラインで閲覧またはダウンロードできます。Cisco UCS C220 M4 11 ページ。 For intel xeon v3 series cpus
Cisco UCS C220 M4 にも：クイック・スタート・マニュアル (29 ページ), クイック・スタート・マニュアル (29 ページ), サービスノート (10 ページ)

ページを印刷する

Replace all the DDR3 memory risers and DIMMs in the server with new DDR4 memory risers and

Step 6

DIMMs.

Use the DIMM and memory riser replacement procedures in the Installation and Service guide for your

server:

Step 7

Power on the server.

Step 8

Wait for Cisco UCS Manager to automatically discover and associate the server.

Upgrade Scenario 2: Standalone Server

This scenario assumes the following conditions:

•

In this case, use the following procedure to upgrade the server, CPUs, memory risers, and DIMMs.

Use the Cisco Host Upgrade Utility (HUU) to upgrade and activate the server Cisco IMC and BIOS to

Step 1

the minimum version for your server (or later).

Use the procedures in the

download and use the utility package.

Be sure to update the Cisco IMC and BIOS when you select which components to update. The Cisco

Caution

HUU ensures that the firmware is matched. The server will not boot if the Cisco IMC and BIOS become

mismatched.

Note

If you use a method other than the Cisco Host Upgrade Utility to update the standalone server's Cisco

IMC firmware, you must also manually initiate a low-level firmware upgrade. See

Requirements, page

Power off the server.

Step 2

Replace the CPUs with the Intel Xeon v3 Series CPUs.

Step 3

Use the CPU replacement procedures in the Installation and Service guide for your server:

C-Series Installation and Upgrade

Replace all the DDR3 memory risers and DIMMs in the server with new DDR4 memory risers and

Step 4

DIMMs.

Use the DIMM and memory riser replacement procedures in the Installation and Service guide for your

server:

Power on the server.

Step 5

Cisco UCS C-Series Installation and Upgrade

The server is in standalone mode.

The server is at a BIOS/Cisco IMC version earlier than the minimum (see

Firmware Requirements, page

The server is using CPUs earlier than Intel Xeon v3 Series.

The server is using DDR3 memory risers and DIMMs.

Cisco Host Upgrade Utility User Guide

Cisco UCS C-Series Installation and Upgrade

Guides.

2).

Guides.

Cisco UCS C-Series Servers Upgrade Guide for Intel Xeon v3 Series CPUs

Minimum Software and Firmware Requirements

Minimum Software and

for your minimum release (or later) to

Low-Level Firmware

Cisco UCS