- ページ 16

サーバー Cisco UCS E SeriesのPDF トラブルシューティングマニュアルをオンラインで閲覧またはダウンロードできます。Cisco UCS E Series 28 ページ。 Ucs e series unified computing system
Cisco UCS E Series にも：製品概要 (8 ページ), インストレーション・マニュアル (46 ページ)

ページを印刷する

LED, DIMM, Video Port, USB Port, and CD/DVD Troubleshooting

DETAILED STEPS

Step 1

In the Navigation pane, click the Server tab.

Step 2

On the Server tab, click BIOS.

Step 3

In the Actions area, click Configure BIOS. The Configure BIOS Parameters dialog box appears.

Step 4

In the Configure BIOS Parameters dialog box, click the Advanced tab.

Step 5

Scroll down until you reach the USB BIOS Settings area.

Step 6

Verify if the USB Port 0 and USB Port 1 are enabled. If the ports are disabled, enable them.

Cannot Boot from the External CD/DVD Device

To resolve this problem, do the following:

• Verify that the USB Port to which the CD/DVD device is connected to, is enabled. See

• Verify that the power current used by the CD/DVD device does not exceed 700mA. If it exceeds 700mA,

• Make sure that the CD/DVD ROM device is configured as the first boot device in the boot order table.

• Reboot the E-Series Server.

Configuring the Boot Order Using the BIOS Setup Menu

Use this procedure if you want the server to boot from an external bootable device, such as an USB or an

external CD ROM drive that is directly connected to the E-Series Server. Do the following from the CIMC

GUI.

Procedure

Troubleshooting Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine

Port Does Not Work, on page

the USB port to which the CD/DVD device is connected to, might not stay stable. The USB port might

go on or off; or might get disabled. To resolve this problem, try connecting the device to an

externally-powered USB hub.

For procedure, See

Configuring the Boot Order Using the BIOS Setup Menu, on page

15.

Overview

Front Panel USB

16.