スキャナー Epson Expression 636のPDF 製品情報マニュアルをオンラインで閲覧またはダウンロードできます。Epson Expression 636 5 ページ。 Product support bulletin(s)
Epson Expression 636 にも： セットアップマニュアル (36 ページ), 簡単セットアップマニュアル (21 ページ), ソフトウェアマニュアル (4 ページ), マニュアル (11 ページ), 製品サポート速報 (14 ページ), 製品サポート速報 (5 ページ)
ページを印刷する
document cover
document table
optional
interface
transportation termination rotary ground
connector
lock lever
AC
SCSI
inlet
interface
connectors
Scanner Specifications
Scanner type:
Flatbed, color
Photoelectric
Color CCD (Charged Coupled Device)
device:
line sensor
Effective pixels:
5096 dots by 7020 dots at 600 dpi, 100%
Maximum
8.5 inches x 11.7 inches
document size:
(216 mm x 297 mm) to allow US letter
size or A4 (The reading area can be
specified from software.)
Scanning
600 dpi (main, sub)
resolution:
Output resolution:
50 to 4800 dpi. Values above 2400
through software interpolation.
Command level:
ESC /I-B6 (B5+AAS)
Scanners
SCSI ID
switch terminal
switch
parallel
interface
connector
Scanning speed
Line art:
(A4,600 dpi, draft
256 gray levels: approx. 5.5 ms/line
mode):
Full color:
Color separation:
RGB color filters on CCD
Reading sequence: Monochrome mode:
One-pass scanning
Color page sequence mode:
Three-pass scanning (R, G, B)
Color byte sequence
One-pass scanning (R, G, B)
Color line sequence mode:
One-pass scanning (R, G, B)
Zoom:
50 to 200% in 1% steps (hardware);
software selectable up to 2000%,
depending on output device
Image data:
12 bits per pixel per color (input).
When over 8 bits are captured, they are
saved as 8 bits per pixel per color
(maximum output)
Brightness:
7 levels
Line art settings:
Fixed threshold with TET (Text
Enhancement Technology) enabled
0 to 255 adjustable threshold with TET
disabled
Halftoning process: Enable/disable selectable
3 halftoning modes (A, B, and C) and
4 dither patterns (A, B, C, and D) for
bi-level and quad-level data
Halftoning mode A only in color line
sequence mode
2 user-defined dither patterns
Gamma correction: 2 types for CRT display
3 types for printer
1 type for user-defined
Color correction:
1 type for CRT display
3 types for printer output (available in
color line sequence mode only)
1 type for user-defined
Interface:
Bidirectional parallel and SCSI
Light source:
Xe-gas cold cathode fluorescent lamp
Reliability:
Main unit MCBF: 100,000 cycles of
carriage movements
Dimensions:
Width:
Depth:
Height: 5.2 inches (133 mm)
Weight:
About 22 lb (10 kg)
EPSON Expression 636
approx. 5.5 ms/line
approx. 8 ms/line
(line/byte sequence)
13 inches (332 mm)
22.2 inches (563 mm)
EPSON Expression 636-l