- ページ 34
サーバー Cisco UCS Invicta C3124SAのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco UCS Invicta C3124SA 40 ページ。
Cisco UCS Invicta C3124SA にも： アップグレード手順 (16 ページ), アップグレード手順 (20 ページ)
ページを印刷する
Choose Option "2," Network Settings and choose <OK>.
Step 1
The Network Settings menu appears.
Choose Option "1," Bonds, and choose <OK>.
Step 2
The Bonds Menu appears.
Choose the name of the bond to edit (bond0) and choose <OK>.
Step 3
Choose Option "2" to edit a specific bond and choose <OK>.
Step 4
The Edit Bond screen appears.
Step 5
The Edit Bond Information screen appears.
Step 6
Press <Tab> to focus on the form and edit any of the following:
<UP/DOWN ()> navigates between list items.
Note
•
IP Address
Subnet Mask
•
MTU
•
Mode
•
Set on Boot? (yes/no) – YES. This function informs the OS that this bond is to come online during
•
the boot process.
Use the following default IP addresses for bond0:
Note
Bond0: 192.168.10.1
•
Netmask: 255.255.255.0
•
The Default Gateway or DNS must be customer configured.
Press <Tab> and then choose <OK> when bond edits are complete.
Step 7
The confirmation screen appears if edits are successful.
Choose <OK>.
Step 8
The Bonds menu appears.
Choose <Back> to return to the Network Settings menu.
Step 9
The Network Settings menu appears.
Choose Option "4" to enter the Default Gateway.
Step 10
The Edit Default Gateway appears.
Step 11
Press <Tab> to move cursor focus and enter the new Default Gateway.
Step 12
Press <Tab> and choose <OK>.
A confirmation screen appears if the gateway was successfully updated.
The IP gateway change does not take effect until the device is rebooted (or logged in as root and services
Note
are restarted).
Cisco UCS Invicta C3124SA Appliance Installation Guide
3-4
Chapter 3
Connecting the Cisco UCS Invicta C3124SA Appliance to the Network
OL-31369-01