- ページ 33

ゲートウェイ Cisco 1100 SeriesのPDF ハードウェア・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 1100 Series 44 ページ。 Terminal gateway
Cisco 1100 Series にも：インストールとアップグレード (15 ページ), マニュアル (12 ページ)

ページを印刷する

Install and Connect the Router

Connecting to DC Power

Warning

To reduce risk of electric shock or fire, installation of the equipment must comply with local and national

electrical codes. Statement 1074

Warning

To reduce risk of electric shock, when installing or replacing the unit, the ground connection must always be

made first and disconnected last. Statement 1046

Warning

To reduce risk of electric shock, before performing any of the following procedures, ensure that power is

removed from the system. Statement 1003

Caution

The two negative and two positive inputs are not intended for redundant connection to two independent sources

of supply. The two negative and two positive input terminals are intended to increase current-carrying capacity

by paralleling conductors.

If the two negative and two positive inputs are used, the negative inputs must be connected to the same source

and the positive inputs must be connected to the same source.

Hardware Installation Guide for the Cisco 1100 Terminal Gateway

Connecting to DC Power