- ページ 11

スキャナー Epson GT-30000 SeriesのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Epson GT-30000 Series 24 ページ。 Color image scanner
Epson GT-30000 Series にも：仕様 (4 ページ), 仕様 (2 ページ), 製品情報 (9 ページ), 製品サポート速報 (23 ページ), 製品サポート速報 (40 ページ), 製品サポート速報 (24 ページ), 製品サポート速報 (29 ページ), 製品サポート速報 (8 ページ), 製品サポート速報 (3 ページ), 製品サポート速報 (11 ページ), 製品サポート速報 (14 ページ), 製品サポート速報 (12 ページ), 製品サポート速報 (40 ページ), 製品サポート速報 (11 ページ), 製品サポート速報 (40 ページ), 製品サポート速報 (22 ページ), 製品サポート速報 (21 ページ), 製品サポート速報 (12 ページ)

Note:

You will need to install the SCSI driver that is normally included with Windows

95, 98, Millennium Edition, NT (see your system documentation for

instructions), or 2000, or the driver described in the SCSI board installation

documentation.

If you are having errors or poor performance, an updated driver may help. The

latest driver may be available for download from the Web site of the SCSI board

manufacturer.

Understanding SCSI connections

Read the following sections to determine how to set up your SCSI devices and whether

you need any optional SCSI cables.

Daisy chain

The SCSI interface allows you to connect up to seven devices (such as a scanner, hard

drive, CD-ROM, and so on) to the computer, in what is called a "daisy chain"

arrangement. Only the first SCSI device in a daisy chain is connected to the computer;

each of the other devices is connected to another SCSI device.

Note:

To work with a scanner in wide SCSI, the scanner must be connected to the wide SCSI

Host Adapter via a 68-pin SCSI cable. If narrow SCSI devices exist between the SCSI

host adapter and the scanner, the scanner works only in the narrow SCSI mode. In this

case, you need to set the select switch to N (narrow).

SCSI cables

You may need to purchase SCSI cables before setting up your SCSI daisy chain. The

scanner has two SCSI connectors: one is for a wide 68-pin SCSI cable and the other

for a narrow 50-pin SCSI cable. Be sure the SCSI cable connectors are suitable for your

hardware, according to the maker of your SCSI device and SCSI interface board.

SCSI ID and terminator

Each device has a SCSI ID number: the computer is usually set to number 7, and each

of the other devices must have a different number between 0 and 6. Also, the first device

and the last device in the chain (not including the computer) must have a terminator.

No other device can have a terminator, or if a terminator does exist, it must be turned

off or removed.