- ページ 13
ゲートウェイ Cisco 3G MicroCellのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco 3G MicroCell 20 ページ。 At&t wireless network gps signal extender
Cisco 3G MicroCell にも： ユーザーマニュアル (20 ページ), ユーザーマニュアル (20 ページ), クイック・スタート・マニュアル (8 ページ)
ページを印刷する
MicroCell Status
This table and diagram identify the status indicators on the 3G MicroCell front panel and describe their operation.
Status
Color/State
Indicator
Red/Steady
Power
Green/Steady
Green/Flashing
Ethernet
(Broadband
Green/Steady
Connection)
Green/Flashing
GPS
Green/Steady
Green/Flashing
PC
(PC/Router
Green/Steady
Connection)
Green/Flashing
3G
(MicroCell
Red/Flashing
Connection)
Green/Steady
*
If any condition marked with an asterisk persists after 20 minutes, see Troubleshooting on page 15 for additional information.
4030453_RevA_6.75x8.25_Mar6.indd 13
4030453_RevA_6.75x8.25_Mar6.indd 13
Description
Off
No power.
MicroCell fault has
occurred.
Power is on and there
are no faults.
Off
No connection.
Physical connection
*
but no IP address.
AT&T network
connection.
Initial state. This
state lasts for several
Off
minutes after power is
connected.
Searching for GPS signal
and/or location fix. This
*
follows the initial state.
Location fix acquired.
Off
No connection.
Ethernet link, passing
*
traffic.
Ethernet link, no traffic.
Off
No configuration.
Initialization is in
process. Flashes may
*
be short or medium in
length.
Fault condition(s) present
*
that impact service.
MicroCell service
available.
Power
Ethernet
GPS
PC
3G
T14082
13
3/6/2009 5:43:34 PM
3/6/2009 5:43:34 PM