- ページ 4

スピーカー FINE AUDIO NV-03345のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。FINE AUDIO NV-03345 7 ページ。 Bluetooth garden speaker

Turning on/off the speaker

There is an on/off switch at the back of the speaker. You can turn on/off the speaker with this

switch. In order to save power, put the switch to off position when the speaker is not in use.

Switch on the speaker(1), and short press the Power button(9), the LED indicator will flash.

Place the speaker and Bluetooth device (phone or music device) so that they are no further

than 3 feet apart;

Activate the Bluetooth function on your Bluetooth device (phone or music device). Please refer

to the manufacturer's instructions for instructions on enabling Bluetooth on your device.

Once you have activated Bluetooth on your device, select the speaker "BT SPEAKER" from

the list of available Bluetooth devices.

If required, enter the password '0000' to confirm & finalize pairing.

Once paired successfully, the blue LED indicator will bright.

You can now start to use the speaker.

If pairing is unsuccessful, turn off the speaker first and then re-pair following the above steps.

Once you have paired the speaker with a device, the speaker will remember this device and

will pair automatically when the device's Bluetooth is activated and in range. You do not need

to re-pair any previously connected devices.

The speaker will attempt to automatically connect to the last device it was paired with when

switched on. If you want to pair it with a new device please long press Power button(9) to

search for the new device.

Once the speaker is paired with your device the music will transmit directly to the speaker.

Please refer to your device's user manual for further information.

Once the speakers are paired with your device you can stream music wirelessly through the

speaker. Select the track you wish to listen to and it will be streamed to your Bluetooth speaker.

Should you encounter any problems while streaming please refer your device's user manual

for further information.

Control Function

If your Bluetooth device supports AVCRP (Audio/Video Remote Control Profile) you can use

the Bluetooth speakers to perform basic remote functions once paired while listening to music.

The functions in the below table may differ depending on your device. Please refer to your

device's user manual for further information.

Function

Previous track

Operation

Button

Playing music

A short press on the

button once