- ページ 27
ゲートウェイ Cisco ASR 5000のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco ASR 5000 37 ページ。 Applying power and verifying the installation
Cisco ASR 5000 にも: インストレーション・マニュアル (18 ページ), インストレーション・マニュアル (33 ページ), インストール手順 (8 ページ)
Applying Power and Verifying the Installation
Checking the Alarm and Link LEDs on the Optical (ATM/POS OC-3) Line Card
Each Optical (ATM) line card provides alarm LEDs for each of its four ports. These LEDs are located directly
below the fourth port, as illustrated in the figure below.
Figure 6: Alarm and Link LEDs on the Optical (ATM) Line Card
Table 24: Alarm/Link States for Optical (ATM) Line Card
LED
Red Alarm
Yellow Alarm
Checking the Alarm and Link LEDs on the Optical (ATM/POS OC-3) Line Card
LED Color
Red (ON)
OFF
Yellow (ON)
OFF
Description
Illuminates when the port is in a fault condition, such
as LOS or LOF.
Off when there is no alarm for this port.
Illuminates when the port is receiving a signal
indicating a problem at the remote end, for example,
RDI.
Off when there is no alarm for this port.
ASR 5000 Installation Guide
27