- ページ 5

遊び場機器 b4Adventure Slackers TREEZONE ADVENTURE THREE HOUSEのPDF マニュアルをオンラインで閲覧またはダウンロードできます。b4Adventure Slackers TREEZONE ADVENTURE THREE HOUSE 12 ページ。

STEP 2: ASSEMBLE THE FRAME AND TENT COVER

YOU WILL NEED

I3. Bottom Frame

Corners

• NOTE: All of this is done on the ground

• Metal square poles are for the bottom. Make sure that when you connect the corners and the tubes, that you line

up the screw holes.

• Slip base frame poles into tent fabric

sleeves. Corners should have connection

piece pointing upwards.

• This is where the vertical wall poles will

connect to the base.

• NOTE: Back pole (I2) is assembled outside

of tent material (see image 3 below). Metal

loops should be facing DOWN so that ladder

can attach in final step.

• Once the base of frame is assembled, turn

over to secure the floor fabric.

• Fold end of floor over I2 and secure on the

underside of the frame.

I1. Base Frame Pole

I2. Back Base Frame Pole

H. Tent Cover

• Attach corners and use correct "C" Screws.

• NOTE: Fabric on corners is tight for safety

reasons. You may need 2 people, one to

hold back fabric while the other tightens the

scews.

*SINGLE LOOP

• Use the buckles under the tent to secure

fabric tightly.

• Double loop for security.

C. Screw

*DOUBLE LOOP

FOR EXTRA

SECURITY