ゲートウェイ Cisco ATA 188のPDF インストール方法をオンラインで閲覧またはダウンロードできます。Cisco ATA 188 6 ページ。 Analog telephone adaptor
Cisco ATA 188 にも： 構成 (28 ページ), 概要 (11 ページ), 概要マニュアル (11 ページ)
ページを印刷するInstalling the Cisco ATA
This section provides instructions for installing the Cisco ATA 186 and Cisco ATA 188. Before you
perform the installation, be sure you have met the following prerequisites:
•
•
•
This section contains the following topics:
•
•
•
•
•
Note
The term Cisco ATA is used throughout this manual to refer to both the Cisco ATA 186 and the
Cisco ATA 188, unless differences between the Cisco ATA 186 and Cisco ATA 188 are explicitly stated.
Safety Recommendations
To ensure general safety, follow these guidelines:
•
•
•
•
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations.
Read the installation instructions before you connect the system to its power source.
Warning
OL-4804-01
Planned the network and Cisco ATA configuration.
Installed the Ethernet connection.
Installed and configured the other network devices.
Safety Recommendations, page 2-1
What the Cisco ATA Package Includes, page 2-2
What You Need, page 2-2
Installation Procedure, page 2-3
Power-Down Procedure, page 2-5
Do not get this product wet or pour liquids into this device.
Do not open or disassemble this product.
Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
Use only the power supply that comes with the Cisco ATA.
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide for H.323 (version 3.0)
C H A P T E R
2
2-1