- ページ 2
ゲートウェイ Cisco EPC3925のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco EPC3925 2 ページ。 For upc
Cisco EPC3925 にも： データシート (12 ページ), マニュアル (8 ページ)
ページを印刷する
Guidelines for starting the wifi
1. Ideal location
In order to ensure the most ideal speed for your wifi connection, please keep in mind the following:
- Wifi coverage in the entire apartment largely depends on the location of the modem.
of the wifi
- Best coverage can be achieved by placing the modem somewhere high, in the middle of the apartment/building,
modem to
for instance on a desk or on a shelf.
- Do not hide the device in the shelf and do not place it between a large TV set and a media box.
ensure optimal
- Please avoid placing it into corners and the coving, or near plants and the aquarium.
operation
- Have the modem away from metal objects, like a PC system unit, or large reflecting surfaces.
- Connection speed may be improved by turning the modem.
2. Setting the
In case you had a wifi device before, you can change its SSID settings by going on the web interface of the new
device and doing the following (you will find the IP address under
wifi network
name
3. Changing the
To change the wifi password, click Security under WIrELESS in the menu.
password
tel.: 1221 | www.upc.hu/ugyfelszolgalat |
facebook.com/upcmagyarorszag
„Additional
information"):
By default the network name is
UPCxxxxxxx, which you will find on the
label on the bottom of the modem.
After making the changes, click ‚Save'!
You can change the default password
(also written on the sticker) here. Type in
the new password twice, then click ‚Save'!
Guidelines for starting the wifi
4. Wifi setting
- When first switched on, the wifi modem automatically chooses the least loaded channel (automatic setting). Later on it
may be necessary to restart the modem so that it finds the most ideal channel.
tips to ensure
- By using a Wifi analyzer or similar software you can identify the least loaded channel that is worth setting manually.
optimal
- If your internet devices allow, use the 5 GHz frequency range, instead of 2.4 GHz, where there is less interference.
operation
5. Checking the
If you want to check guaranteed band-with, do it on cable-connected desktop computer because you may get a
different value on mobile devices.
speed/slow
- Connection speed will be determined on the basis of the slower connection of either the modem or the end
internet
device.
- Human body significantly „shades" the connection, which has to be taken into consideration each time (when
connection
placing the wifi modem, during use and during speed check as well).
When experiencing slow or interrupted internet connection:
- If you experience slow or interrupted internet connection, do a speed check. Before starting the check, please stop
all running applications, downloads or updates.
- restart the modem! Switch it off or unplug it, then reconnect it and try the connection in a few minutes.
- Use encryption. Protect your wifi network with a password from illegitimate use (at least WPA encryption is
recommended).
- If the speed check shows slowi-down or interruption, run a virus check on your computer, then carry out another
speed check.
6. Factory reset
For factory reset go to SYSTEM menu / BACKUP AND rECOVErY.
You can also do factory reset by pressing the rESET button on the back panel of the modem for 15 seconds. After
returning to factory setting, both the network name and the wifi password will be reset to the original found on the
label.
Web applications
- Check if the led lights on the front of the cable modem are lit and if not, please check the plugs (electricity, coaxial
cable, UTP cable) and if the main switch on the back of the modem is set to „I".
do not work and
- The 4
th
led (from the left) should be constantly on, indicating that your device is adequately connected to the
the pages
internet.
- reset factory settings as described in point 6 (by doing so, all your previous settings will be lost).
searched do not
open
tel.: 1221 | www.upc.hu/ugyfelszolgalat |
facebook.com/upcmagyarorszag