- ページ 11

ゲートウェイ Cisco Explorer 4250のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco Explorer 4250 16 ページ。 Home gateway
Cisco Explorer 4250 にも：ユーザーマニュアル (16 ページ)

Performance Tips

If the 4250 does not perform as expected, the following tips may help. If you need further assistance, contact

your cable service provider.

No Picture

• Verify that the power to your TV is turned on.

• If the 4250 is plugged into a wall switch, verify the wall switch is in the ON position.

Note: You should avoid plugging the 4250 into an outlet that is controlled by a wall switch.

• Verify that all cables are properly connected.

• If your system includes a VCR or stereo, verify that you have properly connected them to the 4250.

No Color

• Verify that the current TV program is broadcast in color.

• Adjust the TV color controls.

• Verify that the TV is set to the proper input channel.

No Sound

• If your setup includes a stereo, verify that you have properly connected it to the 4250.

• Verify that the volume is turned up.

• Verify that the mute function is not engaged.

• Check your secondary audio programming (SAP) settings.

The TV screen may display a message that indicates the 4250 is automatically updating its software.

Should this occur, wait for the time to appear on the front panel of your 4250 before continuing. When

the time appears, the update is complete.

Where Are the Connection Diagrams?

The diagrams are on pages 10 through 12 of this guide. The diagrams show examples of common ways to

connect the 4250 to your TV, VCR, and home theater receiver. However, these diagrams do not show every

possible combination of devices. Refer to the user's guides that came with your other electronic devices for

further information.

What Cables Do I Need?

The connection diagrams in this guide indicate which kind of cables are required for each connection.

Some of the cables and adaptors shown in the diagrams may not be included with the 4250.