- ページ 12
ゲートウェイ Cisco Expressway CE1200のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Expressway CE1200 23 ページ。
Cisco Expressway CE1200 にも： 家電製品設置マニュアル (42 ページ)
ページを印刷する
Cisco Expressway CE1200 Appliance Installation Guide
Install the Appliance
4.
The first boot takes approximately 5 minutes due to the initial power characterization test. Any subsequent
boot of the system takes approximately 2 minutes. The power characterization test displays the message
Performing Platform Characterization ... when running.
5.
If the power characterization test runs on subsequent bootups, causing a lag in the boot time, it is important
that you disable it. It is especially important to disable the test in a clustered environment to avoid issues. See
the
Appendix 1: Troubleshooting, page 19
Task 4: Verify Power Status
Check the Power Status LED on the front of the appliance:
Off. No AC power is present in the appliance.
■
Amber. Appliance is in standby power mode. Power is supplied only to the CIMC and some motherboard
■
functions.
Green. Appliance is in main power mode. Power is supplied to all server components.
■
Monitoring power consumption
The CIMC has a power monitoring utility that you can use to track power consumption.
section for more information.
12