- ページ 9

ゲートウェイ Cisco IOS RouterのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Cisco IOS Router 12 ページ。 Siemens hipath 4000 release 1 and siemens hicom 330e release 3.1 to cisco ios voice gateway using e1 qsig with h.323
Cisco IOS Router にも：製品情報 (11 ページ), アプリケーションノート (41 ページ)

ページを印刷する

In the configured Cisco IOS IPS storage directory, you may find the following files. These files

have a name format of <routername>-sigdef-xxx.xml.

training#cd ipsstore

training#show flash:

24576K bytes of processor board System flash (Intel Strataflash)

Directory of flash:/ipsstore/

-rwx

5693

Aug 11 2006 23:41:32 -08:00

-rwx

21285

Aug 11 2006 23:41:35 -08:00

-rwx

172587

23482368 bytes total (6076416 bytes free)

training#

These files are stored in a Cisco proprietary compression format and are not editable or viewable

directly. The contents of each file are described below:

training-sigdef-typedef.xml: A file that has all the signature parameter definitions

training-sigdef-category.xml: Has all the signature category information, such as category ios_ips

basic and advanced

training-sigdef-default.xml: Contains all the factory default signature definitions

6 Enable/Disable Signatures

You can use the Cisco IOS Software command-line interface (CLI) to enable or disable one

signature or a group of signatures based on signature categories.

Following are example CLI commands to disable signature 6130/10.

training#configure terminal

Enter configuration commands, one per line.

training(config)#ip ips signature-definition

training(config-sigdef)#signature 6130 10

training(config-sigdef-sig)#status

training(config-sigdef-sig-status)#enabled false

training(config-sigdef-sig-status)#exit

training(config-sigdef-sig)#exit

training(config-sigdef)#exit

Do you want to accept these changes? [confirm]y

training(config)#

Aug 11 2006 23:43:29 -08:00

training-sigdef-typedef.xml

training-sigdef-category.xml

training-sigdef-default.xml

End with CNTL/Z.

White Paper

Page 9 of 12