- ページ 3

ゲートウェイ Cisco IOS RouterのPDF アプリケーションノートをオンラインで閲覧またはダウンロードできます。Cisco IOS Router 41 ページ。 Siemens hipath 4000 release 1 and siemens hicom 330e release 3.1 to cisco ios voice gateway using e1 qsig with h.323
Cisco IOS Router にも：製品情報 (11 ページ), スタートマニュアル (12 ページ)

ページを印刷する

Features

Features Supported

•

Basic Call (ENBLOC and Overlap)

•

Call Transfer: Supervised Local Transfer

•

Call Transfer: Supervised Network/External Transfer

•

Call Conference: Local

•

Call Conference: Network/External

•

Call Forward: Local

•

Call Forward: Network/External

Features Not Supported

•

Call Hold

•

MWI

Limitations

•

On basic calls, Connected Number was supported in lieu of Called (Alerting) Number. This is inherent to the PBXs and also occurs with

the PBXs connected directly via an E1 QSIG trunk.

•

On Supervised Transfers, the original Calling Name and Number were displayed on the final destination phone only after the destination

answered and the transfer was completed. This is inherent to the PBXs and also occurs with the PBXs connected directly via an E1

QSIG trunk.

•

On Supervised Transfers, the Called Name/Number were displayed on the originating phone only after the destination answered and the

transfer was completed. This is inherent to the PBXs and also occurs with the PBXs connected directly via an E1 QSIG trunk.

•

Call Hold was not tested as a separate feature. The call is held automatically during Transfers or Conferences, and the call hold is

facilitated in NOTIFY message from Siemens HiPath/Hicom PBX. Aside from Transfers or Conferences, it is not possible to put a call

on hold from one of the Siemens HiPath/Hicom digital station phones. This is inherent to the PBXs and also occurs with the PBXs

connected directly via an E1 QSIG trunk.

•

MWI was not tested, as a local voice mail system was not available on the PBXs at the time of testing.

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com

Page 3 of 41