- ページ 21
ゲートウェイ Cisco LINKSYS AG241のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco LINKSYS AG241 41 ページ。 Adsl2 gateway with 4-port switch
ページを印刷するAppendix A
Appendix A:
Troubleshooting
I can't connect to the Internet.
1.
Verify the proper LEDs are lit on the Gateway.
•
Make sure the Power LED has a steady green light
and is not flashing.
•
Verify the Ethernet LED has a fairly steady green
light. It will flash occasionally, indicating activity.
Verify the Signal Strength LEDs are lit.
•
2.
Power down everything, and power on each device in
the following order:
Gateway
•
•
PC
I cannot access the web-based utility after my computer
goes into sleep mode.
Disconnect the power from the Gateway and reconnect it.
You should be able to access the web-based utility once
the Gateway has fully booted.
I need to modify the settings on my Gateway.
1.
Open your web browser.
2.
Type the gateway's IP address into the address bar (the
default IP address is 192.168.1.1).
3.
When prompted, type in the user name and password
to your router (default is admin).
4.
Click on the appropriate tab to change the settings.
WEB:
If your questions are not addressed here,
refer to the Linksys website, www.linksys.com
ADSL2 Gateway with 4-Port Switch
Troubleshooting
18