- ページ 45

ゲートウェイ Cisco S195のPDF ハードウェア・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Cisco S195 50 ページ。 Web security appliance
Cisco S195 にも：スタートマニュアル (18 ページ), マニュアル (24 ページ)

ページを印刷する

Maintenance and Upgrades

Warning

Step 1

Remove the drive that you are replacing:

a) Press the release button on the face of the drive tray.

b) Grasp and open the ejector lever and then pull the drive tray out of the slot.

Statement 1018 Supply Circuit

To reduce risk of electric shock and fire, take care when connecting units to the supply circuit so that

wiring is not overloaded.

Statement 1019 Main Disconnecting Device

The plug-socket combination must be accessible at all times, because it serves as the main disconnecting

device.

Statement 1024 Ground Conductor

This equipment must be grounded. To reduce the risk of electric shock, never defeat the ground conductor

or operate the equipment in the absence of a suitably installed ground conductor. Contact the appropriate

electrical inspection authority or an electrician if you are uncertain that suitable grounding is available.

Statement 1030 Equipment Installation

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Statement 1073 No User-Serviceable Parts

There are no serviceable parts inside. To avoid risk of electric shock, do not open.

Statement 1074 Comply with Local and National Electrical Codes

To reduce risk of electric shock or fire, installation of the equipment must comply with local and national

electrical codes.

Cisco Web Security Appliance S195, S395, S695, and S695F Hardware Installation Guide

Remove and Replace a Drive