- ページ 21

ゲートウェイ Cisco VG400 seriesのPDF ソフトウェア設定マニュアルをオンラインで閲覧またはダウンロードできます。Cisco VG400 series 22 ページ。 Voice gateway
Cisco VG400 series にも： ハードウェア・インストール・マニュアル (40 ページ), インストール (13 ページ)

ページを印刷する
Cisco VG400 series ソフトウェア設定マニュアル
Configuring Voice Ports
3. service
4. shutdown
5. preference
The port subcommand specifies what ports to configure for a specific group command. It has the following
formats:
port <voice port#> [ans | called | dest] <E164 address> [desc <description>]
port <voice port#> [desc <description>]
port <voice port#>
port <start voice port#>-<end port#> [ans | called | dest] <E164 address> <interval>
[desc <description>]
port <start voice port#>-<end port#> [ans | called | dest] <E164 address> [desc
<description>]
port <start voice port#>-<end port#> [desc <description>]
port <start voice port#>-<end port#>
port all [ans | called | dest] <E164 address> <interval> [desc <description>]
port all [ans | called | dest] <E164 address> [desc <description>]
port all [desc <description>]
port all
• The
• The ans is the abbreviation for
dial-peer voice <tag> pots
• The called is the abbreviation for
subcommand under
• The dest is the abbreviation for
dial-peer voice <tag> pots
• The
zero and the allowable value is from 1 to 100, inclusively.
• Multiple port commands are allowed and can be removed one by one with exact port specification or all
at once using
• No overlay port commands are allowed. As a result, no other port commands are allowed if port all is
configured.
is composed of
voice port#
answer-address
.
dial-peer voice <tag> pots
description
.
denotes the interval value of the E164 number for each adjacent port. The default is
<interval>
.
no port all
slot#/subunit#/port# or slot#/port#
, which has the same meaning as the subcommand under
, which has the same meaning as the
incoming called-number
.
, which has the same meaning as the subcommand under
Cisco VG400 Voice Gateway Software Configuration Guide
Cisco IOS Bulk Configuration
.
15