- ページ 9

スキャナー Epson ProofPlus TM-H6000IIIのPDF 開発マニュアルをオンラインで閲覧またはダウンロードできます。Epson ProofPlus TM-H6000III 45 ページ。 Ecc printer
Epson ProofPlus TM-H6000III にも：製品マニュアル (27 ページ), パンフレット (2 ページ), 仕様 (2 ページ), パンフレット (6 ページ), ユーザーマニュアル (32 ページ), 開発マニュアル (26 ページ), 開発マニュアル (32 ページ), マニュアル (10 ページ), ユーザーマニュアル (29 ページ)

When the dialog box is displayed, press the [Read] button. The checks to be

read

here

are

CHK_DI_CHANGE_MODE of DirectIO.

remove and then set the check in slip station. If a check or card is set correctly,

data will be read.

inserting a check or card will be displayed. After inserting the check or card,

press the [Read] button. Then the check or card is read. Reading takes from a

few seconds to dozens of seconds. Confirm the reading state on the progress

bar. The read data appears as an image in the dialog box, and the image format

is fixed at bitmap. For CheckHealth, part of the image is read in and displayed.

Confirm the contents.

When the method is executed by OPOS_CH_INTERACTIVE, the character

strings of the CheckHealthText property are as follows.

"Interactive Hcheck: Canceled"

"Interactive Hcheck: Complete"

After executing the CheckHealth method, be sure to confirm the returned value.

If an error has occurred, there is no point in referring to the CheckHealthText

property. For details on the error, please refer to Section 6 of this manual.

APPLICATION DEVELOPMENT GUIDE

read

accordance

If a check or card is not set, a message requesting for

When the [Close] button is pressed

without executing the [Read].

When the [Close] button is pressed after

executing the [Read].

CheckScanner

Version 3.00 Feb. 2019

with

the

If the Check is present, please first

set

mode