- ページ 5

スキャナー Epson RX500 - Stylus Photo Color InkjetのPDF スタート・ヒア・マニュアルをオンラインで閲覧またはダウンロードできます。Epson RX500 - Stylus Photo Color Inkjet 9 ページ。 Product support bulletin(s)
Epson RX500 - Stylus Photo Color Inkjet にも： オーナーズマニュアル (15 ページ), ユーザーマニュアル (20 ページ), 製品情報シート (4 ページ), 仕様 (2 ページ), セットアップマニュアル (2 ページ), ユーザーマニュアル (12 ページ), 更新 (1 ページ), 製品サポート速報 (6 ページ), 製品サポート速報 (1 ページ), 取扱説明書 (4 ページ)

ページを印刷する
Epson RX500 - Stylus Photo Color Inkjet スタート・ヒア・マニュアル
8
Install Software and

Connect to Your Computer

The software works with
OS 8.6 to 9.x and OS X 10.2 to 10.3.
Windows
1
Make sure the RX500 is not
connected to your computer,
then turn on your computer.
Note: If your RX500 is turned on
and connected, you may see
several New Hardware screens.
Click Cancel for each one and
disconnect the RX500. You can't
install your software that way.
2
Insert the Epson CD-ROM in your
CD-ROM or DVD drive.
Note: With Windows XP, if you see a
message asking what you want
Windows to do, click Cancel.
3
When you see this screen, click
Install.
If this screen doesn't open
automatically, double-click
My Computer (or click Start >
My Computer). Then double-click
the EPSON CD-ROM icon.
4
Read the license agreement and
click Agree to continue. The
computer installer copies files to
your computer.
5
When you see this screen, make
sure the RX500 is turned on, then
lift up the scanner.
6
Remove the yellow sticker and plug the square end of a USB cable into
the USB port on the RX500. Then route the cable in the slot as shown.
Caution: Make sure the USB cable fits securely into the slot. The USB
connector may snap if the cable is not routed correctly and the scanner
is closed with force.
7
Close the scanner carefully.
8
Plug the flat end of the cable into
any available USB port on your
computer. Several messages
appear on the screen. Wait for all
the screens to disappear.
Note: If the blue USB screen
doesn't disappear, make sure the
RX500 is turned on and securely
connected to your computer.
Windows
®
98, Me, 2000, and XP,
and
Macintosh
®
continue