- ページ 15
スキャナー Epson RX595 - Stylus Photo Color InkjetのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Epson RX595 - Stylus Photo Color Inkjet 17 ページ。 Photo all-in-one ultra hi-definition
Epson RX595 - Stylus Photo Color Inkjet にも： 技術概要 (11 ページ), クイックマニュアル (48 ページ), スタート・ヒア・マニュアル (8 ページ), 更新 (1 ページ), スタート・ヒア・マニュアル (7 ページ)
ページを印刷する
Checking and Cleaning the Print Head
You can print a nozzle check pattern to check for clogged
nozzles and clean the print head using the RX595 Series
control panel or your software (see the on-screen User's Guide).
Note:
You cannot clean the print head if an ink cartridge is low or expended.
You must replace the cartridge first (see page 13).
Checking the Print Head Nozzles
1. Load a few sheets of plain paper in the sheet feeder. See
page 5.
2. Press the
button.
Setup
3. Select
and press
Maintenance
.
OK
4. Select
and press
Nozzle Check
.
OK
5. Press x
.
Start
6. Check the nozzle check pattern that prints to see if there are
gaps in the lines.
Nozzles are clean
Nozzles need
cleaning
7. If there are no gaps, the print head is clean. Click
continue printing. If there are gaps or the pattern is faint,
press x
to clean the print head. Repeat if necessary.
Start
Cleaning the Print Head
1. Load a few sheets of plain paper in the sheet feeder. See
page 5.
2. Press the
3. Select
Maintenance
.
OK
4. Select
Head Cleaning
.
OK
5. Press x
Cleaning takes around 1 minute. When it's finished, you
see a message on the display screen.
Caution:
Never turn off the RX595 Series during a cleaning cycle or you
may damage it.
6. Press x
print head is clean.
You may need to clean the print head up to 3 times. You can
also turn the RX595 Series off and wait at least 6 hours. Then
try printing again.
Aligning the Print Head
If your printouts become grainy or blurry, or you see dark or
light bands across them, you may need to align the print head.
You can align the print head using the control panel or your
software (see the on-screen User's Guide).
1. Load a few sheets of plain paper in the sheet feeder. See
to
OK
page 5.
2. Press the
3. Select
Maintenance
.
OK
4. Select
Head Alignment
press
OK
5. Press x
sheet prints.
6. Check the alignment pattern
that prints. Find the pattern in
each set that has the least visible
vertical lines.
7. Press r to enter the number of
the best pattern in the first set,
then repeat for the other sets.
8. Press
OK
5/07
Epson Stylus Photo RX595 Series
button.
Setup
and press
and press
.
Start
to run a nozzle check and confirm that the
Start
button.
Setup
and press
and
.
. The alignment
Start
when you're done.
15