- ページ 12
室内装飾品 Argos Malibu Tall Unit 833/7115のPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Argos Malibu Tall Unit 833/7115 16 ページ。
ページを印刷する
Assembly Instructions
Step 18
Drill the handle hole
in the door
Important: Please follow
these instructions
carefully.
Lay the door
down
8
onto a smooth surface.
Important: Carefully
choose which hole you
need to drill.
This will depend on
which side
or
1
2
you fitted the hinge
plates
.
K
Check that the holes and
hinges are in the same
place as the diagrams.
Note: We recommend
the use of a small piece
of waste wood, placed
behind the hole while
drilling, to reduce the
possibility of any
breakout.
Using the pilot hole in
the rear face of the door,
drill through the hole
indicated opposite, using
a 2.5mm diameter drill.
Turn the door over and
open out the 2.5mm hole
that you have just drilled
by drilling back through it
with a 5mm drill.
Note: Drill bits are not
provided.
11
Carefully choose which hole you will need to drill
Drill this hole if you
have fitted the hinges
to the left end.
8
Drill this hole if you
have fitted the hinges
to the right end.
8
IMPORTANT
or
ONLY drill
this hole
Small piece of
waste wood
ONLY drill
this hole
8
Small piece of
waste wood
8