ヘッドフォン CROSSZONE CZ-1のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。CROSSZONE CZ-1 2 ページ。 Stereo headphone

ページを印刷する

Thank you for purchasing the CROSSZONE CZ-1 headphones. For proper use,

please read this manual carefully. In addition, please put the instruction manual

and warranty card away for future reference.

Safety Precautions

Safety issues have been taken into full account while designing this product.

Incorrect use of the product may cause accidents. In order to prevent the

occurrence of accidents, please follow the instructions below.

This icon indicates a situation which

could result in death or severe injury

to persons who disregard these

instructions and handle the product

incorrectly.

• Never use this product during

the operation of automobiles,

motorcycles, bicycles and other

vehicles, so as to avoid traffic

accidents.

• Never use the product at dangerous

places (railway crossings, stations,

construction sites, roads with running

vehicles or bicycles) so as to avoid the

occurrence of accidents due to the

failure to hear your surroundings.

Precautions for Use

• Please read the instruction manual of the audio device carefully before using it.

• Please pay attention to adjust the volume in the public transport facilities and

public places, so as not to disturb others.

• Turn down the volume of the audio device prior to connecting the headphones.

• This product is made of metal materials. Depending on the seasons, it may

give you the feeling of cold when you touch it, and it may generate static

electricity.

• Do not throw, hit or drop this product, otherwise malfunction may be caused.

• If this product is not in use for a long time, please keep it in a dry and clean

place.

• Hold the headphone connector plug to connect and unplug it. Do not pull the

headphone cable, otherwise the headphone cable may break.

CZ-1 Stereo Headphone

Instruction Manual

This icon indicates a situation

which could result in personal

injury or physical damage, if these

instructions are disregarded and

the product is handled incorrectly.

• Do not listen at high volume levels

for long periods of time to prevent

hearing damage.

• If you feel your skin uncomfortable

during use, please stop using it

immediately

• Do not disassemble or attempt to

repair this product by yourself.

Product Specifications

Design and specifications are subject to change without notice.

Device Type

Closed Dynamic Stereo Headphone

Frequency

20Hz~40kHz

Range

Impedance

75Ω

Sound Pressure

97dB/mW

Sensitivity

Weight

Approx.485g (Body Only)

1.5m Headphone Cable (Φ 3.5mm Plug),

3.5m Headphone Cable (Φ 6.3mm Plug),

Accessories

Φ 3.5mm ⇔ 6.3mm Plug Adaptor,

Instruction Manual, Warranty Card

Parts Names

Before operating the product, please refer to the diagram below to confirm

various parts of the headphones.

Headband

Hinge (Adjustment Angle 50 °)

Joint (Adjustment Angle ± 15 °)

Made in Japan

Housing

Ear Pad

Headphone Jack