- ページ 16

プリンターアクセサリー Epson DLQ-3500のPDF クイックマニュアルをオンラインで閲覧またはダウンロードできます。Epson DLQ-3500 32 ページ。 Epson serial impact dot matrix printers
Epson DLQ-3500 にも：セットアップマニュアル (31 ページ), お知らせ (1 ページ), リファレンス・マニュアル (34 ページ)

ページを印刷する

Single Sheets with the Cut-Sheet Feeder

Loading paper to the cut-sheet

feeder

For single-sheet multipart forms, use only

the type of forms that are glued at the top.

To avoid paper jams, do not allow too many

printed sheets to be stacked on the paper

guide at one time. Remove the stack when it

is half as thick as the paper loading limit

marked on the cut-sheet feeder.

Follow these steps to load paper to the

cut-sheet feeder:

1. Pull the paper set lever forward until the

paper guides retract to allow paper

2. Release the paper guide lock levers by

pulling them forward.

EPSON DLQ-3500 Quick Guide

3. Slide the right paper guide so that its

edge is even with the guide mark on the

cut-sheet feeder and push back the lever

to lock the paper guide in place. Next,

slide the left paper guide to roughly

match the width of the paper.

4. Slide the center support midway

between the paper guides.

5. Fan a stack of paper, and tap the sides

and bottom of the stack on a flat surface

to even it up.

Caution:

Do not load labels to the cut-sheet

feeder.

Single Sheets with the Cut-Sheet Feeder (1/3)