- ページ 7
屋外ライト Acuity Brands Lighting RPAのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Acuity Brands Lighting RPA 18 ページ。
ページを印刷するInstallation Instructions
RSX LED
3. Loosen the set screws enough to flip the luminaire over as shown below in figure 8a, then loosen the six captive screws
on door to access the wire connection area. Remove the rubber grommet (see figure 8b) before feeding the wires.
4. Remove the luminaire from the tenon to insert input wires through the holes of the rubber grommet, pull them into the
wire connection area. Replace the rubber grommet back as originally assembled before wire feeding (See Figure 8b & 8c).
©2016 Acuity Brands Lighting, Inc.
All Rights Reserved.
Lithonia Lighting Outdoor
One Lithonia Way, Conyers, GA 30012
Phone: 800-279-8041 Fax: 770-918-1209
www.lithonia.com
Part Number: IM-459 Rev A
Revision Date: 8/29/19
Page #5