- ページ 6

プリンターアクセサリー Epson FX-880 - Impact PrinterのPDF クイック・リファレンスをオンラインで閲覧またはダウンロードできます。Epson FX-880 - Impact Printer 12 ページ。 Warranty statement
Epson FX-880 - Impact Printer にも：仕様書 (2 ページ), インストールマニュアル (10 ページ), 製品情報 (17 ページ), クイック・リファレンス・マニュアル (16 ページ), マニュアル (11 ページ), 仕様 (2 ページ), 重要事項説明書 (8 ページ), 組立マニュアル (8 ページ), 限定保証 (1 ページ)

Removing continuous paper

1. When you finish printing, press the Tear

off/Bin button to feed the paper's

perforation to the tear-off edge.

2. Tear off the printed document.

3. Press the Load/Eject button to feed the

continuous paper backward out of the

printer and into the standby position.

Caution:

Make sure you tear off your printed

document before pressing the Load/Eject

button. Reverse feeding several pages at a

time may cause a paper jam.

1. Tear off the fresh supply of continuous

labels at the perforation nearest the slot

where the labels enter the printer.

2. Hold down the LF/FF button to eject the

remaining labels from the printer.

Caution:

Never feed labels backward using the

Load/Eject or Tear off/Bin button.

Labels can easily come off the backing

sheet and cause a jam.

Note:

See Chapter 3 of your User's Guide for more information on loading continuous paper with the front or rear

push tractor, or for information on using the pull tractor.

Tear off the printed document at the perforation (pull

it towards you for a clean cut) before pressing the

Load/Eject button.

Tear off the unprinted labels; then hold down the

LF/FF button to eject the remaining labels.