- ページ 22
プリンターアクセサリー Epson FX-880+のPDF クイックマニュアルをオンラインで閲覧またはダウンロードできます。Epson FX-880+ 33 ページ。 Epson serial impact dot matrix printers
Epson FX-880+ にも： セットアップマニュアル (33 ページ), パンフレット＆スペック (24 ページ), マニュアル (18 ページ), 仕様 (2 ページ), 最初にお読みください (2 ページ), リファレンス・マニュアル (34 ページ)
ページを印刷する
Special Papers
Continuous multipart forms
Except for setting the paper-thickness lever,
you load continuous multipart forms the
same way as ordinary continuous paper. See
the appropriate section of the Quick Guide
for detailed instructions.
Note:
❏ Be sure your multipart forms do not exceed
0.46 mm (0.018 inch) in thickness.
❏ Do not load paper that is curled or has been
folded.
❏ Thick paper, such as multipart forms with
five or six parts, requires a straight paper
path to avoid paper jams. Load thick paper in
the front or bottom slots.
Single-sheet multipart forms
When loading single-sheet multipart forms,
you need to use the front paper entry slot
with the optional front paper guide or front
sheet guide installed on your printer,
because thick paper, such as multipart forms
with five or six parts, requires a straight
paper path to avoid paper jams.
To load single-sheet multipart forms, follow
the instructions in "Loading paper in the
front sheet guide or front paper guide", in
the Reference Guide.
Note:
❏ Be sure your multipart forms do not exceed
0.46 mm (0.018 inch) in thickness.
❏ Do not load paper that is curled or has been
folded.
Downloaded from:
http://www.usersmanualguide.com/
EPSON FX-880+/FX-1180+ Quick Guide
Labels
When printing on labels, use only the type of
labels that are mounted on continuous
backing sheets with sprocket holes for use
with a tractor feeder. Do not try to print on
single sheets with labels because the printer
may not feed labels on a shiny backing sheet
properly.
Thick paper, such as continuous paper with
labels, requires a straight or almost straight
paper path. You can load labels in the front
(push tractor or pull tractor) or bottom (pull
tractor) paper slot; however, for best results,
use the tractor in the pull position, and load
paper in the front or bottom paper slot.
The loading procedure for continuous paper
with labels is the same as that for ordinary
continuous paper, except that you must set
the paper-thickness lever to 2 before
printing. See "Continuous Paper with the
Pull Tractor" for more information.
Special Papers (1/3)