- ページ 8

プリンターアクセサリー Epson FX-880+のPDF クイックマニュアルをオンラインで閲覧またはダウンロードできます。Epson FX-880+ 33 ページ。 Epson serial impact dot matrix printers
Epson FX-880+ にも：セットアップマニュアル (33 ページ), パンフレット＆スペック (24 ページ), マニュアル (18 ページ), 仕様 (2 ページ), 最初にお読みください (2 ページ), リファレンス・マニュアル (34 ページ)

Paper-Thickness Setting

Before you start printing, you may need to

change the paper-thickness setting

depending on the type of paper you are

using. Follow these steps:

1. Turn the printer off and open the printer

cover. The paper-thickness lever is

located on the left side of the printer. The

numbers next to the lever indicate the

thickness setting.

Downloaded from:

http://www.usersmanualguide.com/

EPSON FX-880+/FX-1180+ Quick Guide

2. Use the table below to select the

appropriate paper thickness.

Paper type*

Ordinary paper:

Single sheets

Continuous paper

Thin paper

Carbonless multipart forms with:

2 parts (original + 1 copy)

3 parts (original + 2 copies)

4 parts (original + 3 copies)

5 parts (original + 4 copies)

6 parts (original + 5 copies)

Continuous paper with labels

Envelopes

* See the paper specifications for more information.

Note:

❏ When the temperature is 5°C (41°F) or less,

set the paper-thickness lever one position

lower to improve print quality.

❏ When the temperature is 35°C (95°F) or

more, set the paper-thickness lever one

position higher to improve print quality.

Paper-Thickness Setting (1/1)

Lever

position

0 or 1

-1 or 0

2 to 6