- ページ 11

GPS TomTom LINK 3000のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。TomTom LINK 3000 25 ページ。 Vehicle tracking device

Testing operation

Power/Ignition test

Testing

opera-

tion

Before testing the connection to power and to

ignition make sure you have carried out the

steps described in the previous chapters.

1. Please check all connections to the

TomTom LINK 300 (wires, fuses etc.).

2. Check that the SIM card is inserted

correctly.

3. Turn on the ignition. The LED must be on

with occasional (100ms) periods off.

4. Turn off the ignition - the LED must now be

off with occasional (100ms) periods on.

If the LED does not perform accordingly see

Diagnostics on page 21.

GPRS / GPS reception test

For this test, you may need to move the

vehicle to a location with a clear view of the

sky, to make sure that you have adequate GPS

and GPRS reception.

For this test put the TomTom LINK 300 into the

place where you want to affix it (please see

Mounting the TomTom LINK 300 on page 13).

1. Turn on the ignition.

2. Monitor the LED. It must be on with

occasional (100ms) periods off.

3. Please wait until the LED stops flashing.

If the LED keeps flashing longer than 10 min see

Diagnostics on page 21.