プリンターアクセサリー Epson LABELWORKS PX 211STBRPXのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Epson LABELWORKS PX 211STBRPX 2 ページ。 Shrink tube

ページを印刷する

Shrink Tube Instruction Manual

Shrink tube - information deemed reliable but not guaranteed. See manufacturer's

speci cation sheet for further information. Test for your applications.

2001XLST, 2011XLB, 2012XLST, BEE3®, BEE3®+, 2020LSTB, 2020LSTB-PC, 2010-PC, 2011XLB-PC, 2012XLST-PC, PEAR

Label ® 270, PEAR Label ® 360, BEE3®-EZ, BEE3®-EZ+, LW-PX900, LW-PX800, LW-PX750, LW-PX700, LW-PX400,

LW-PX350, LW-PX300

PART NO.

INK

TUBE

SIZE

*Compatibility

COLOR

203STBWPX

BLACK

WHITE

1/8"

203STBYPX

BLACK

YELLOW

1/8"

203B20BWPX

BLACK

WHITE

1/8"

203B20BYPX

BLACK

YELLOW

1/8"

205STBRPX

BLACK

RED

3/16"

205STBYPX

BLACK

YELLOW

3/16"

205STBWPX

BLACK

WHITE

3/16"

205STWBPX

WHITE

BLACK

3/16"

205STBBPX

BLACK

BLUE

3/16"

205STBGPX

BLACK

GREEN

3/16"

208STBWPX

BLACK

WHITE

1/4"

208STBYPX

BLACK

YELLOW

1/4"

208B20BWPX

BLACK

WHITE

1/4"

210STBWPX

BLACK

WHITE

3/8"

211STBRPX

BLACK

RED

1/2"

211STBYPX

BLACK

YELLOW

1/2"

211STBWPX

BLACK

WHITE

1/2"

211STWBPX

WHITE

BLACK

1/2"

214STBWPX **

BLACK

WHITE

9/16"

214STBYPX **

BLACK

YELLOW

9/16"

221STBWPX **

BLACK

WHITE

7/8"

221STBYPX **

BLACK

YELLOW

7/8"

Part Number & Model Notes:

*BEE3®, BEE3®-EZ, LW-PX300 use only 203 & 205 shrink tube sizes. BEE3®+, BEE3®-EZ+, & LW-PX350 use 203

through 211 sizes. LW-PX400, LW-PX700 & LW-PX750 use only 203-214 sizes.

**Cannot be used with PEARLabel® 360

For all "20#ST" Supplies

Shrinkage Rate:

50% or more in diameter, 15% or less in length. Ratios noted.

Temperature Range:

-55ºC to 125ºC (Operating)

Compliance Standards:

UL Standard 224 (Rated Temperature: 125°C, Rated Voltage: 300V,

Flame Resistance Grade VW-1), RoHS compliant

For all "20#B20" Supplies Please refer to the Sumitomo B20 (3X) FLT spec sheet.

• Although the tube is made of insulating materials (polyole n), it does not meet the standards set for insulated tube

construction. Do not use the tube in locations where withstand voltage capability is required.

User Precautions

• Prints may appear distorted due to special surface materials. Prints may become diminished if the surface of the

tube is scratched or wiped with paint thinner, etc.

Internal

Range

Diameter

SHRINK

of Wire

AWG

as supplied

Diameter

RATIO

mm (min)

(in)

16-22

3:1

3.2

.044-.105

16-22

3:1

3.2

.044-.105

14-22

3:1

3.8

.055-.150

14-22

3:1

3.8

.055-.150

8-12

2:1

5.7

.130-.205

8-12

2:1

5.7

.130-.205

8-12

2:1

5.7

.130-.205

8-12

2:1

5.7

.130-.205

10-20

3:1

4.8

.069-.160

10-20

3:1

4.8

.069-.160

6-18

3:1

6.4

.091-.215

6-18

3:1

6.4

.091-.215

6-18

3:1

6.6

.095-.240

4-12

3:1

9.5

.138-.315

2-8

2:1

10.9

.228-.409

2-8

2:1

10.9

.228-.409

2-8

2:1

10.9

.228-.409

2-8

2:1

10.9

.228-.409

0-5

2:1

.303-.492

0-5

2:1

.303-.492

0000-1

2:1

.461-.768

0000-1

2:1

.461-.768

• When the tube shrinks, the printed characters may become distorted and di cult to read. Printed bar codes may

also become undecipherable.

• This product is not intended for use on any person or animal.

• Avoid storing this product in places with high temperatures or humidity. Do not expose this product to direct

sunlight, dust particles or the outdoors. For best results, use this product immediately after it is removed from its

packaging.

Shrink Tube material requires a higher ribbon concentration to print solid characters on the thicker

Range

shrink tube material. Based on your machine model, follow these instructions to increase print density.

of Wire

1. Set the cartridge in the 2011XLB, 2012XLST, 2012XLST-PC, 2010-PC, BEE3®, BEE3®+, 2020LSTB,

Diameter

2020LSTB-PC, BEE3®-EZ, BEE3®-EZ+, PEARLabel® 270, PEARLabel®360 or LABELWORKS PX printers.

(mm)

Note: The LW-PX300 DOES NOT have adjustable print density.

1.11-2.66

FOR 2001XLST, 2012XLST, BEE3®, BEE3®+, BEE3®-EZ, BEE3®-EZ+, LW-PX350

1.11-2.66

2. Press "Shift" + "Condition". Arrow down to density (PrnDensity on

1.40-3.30

BEE3® or BEE3®+, LW-PX350) and press "Return".

1.40-3.30

3. Now arrow to "+3" and press Return.

4. Now enter characters. Then Print.

3.30-5.20

FOR 2020LSTB

3.30-5.20

2. Press "Shift" + "Setting/Extra". Arrow to Print density, Return.

3.30-5.20

3. Arrow to +3, Return.

4. Now enter characters. Then print.

3.30-5.20

1.75-4.06

FOR 2010-PC, 2011XLB-PC, 2012XLST-PC, 2020LSTB-PC,

PEARLabel® 270, PEARLabel® 360, LW-PX800

1.75-4.06

2. Create label using Label Editor Software.

2.31-5.46

3. Choose File, Printer Settings. On the Graphics Tab, Move

2.31-5.46

concentration to + 3. Click OK. File. Print.

2.40-6.10

For LW-PX400 & iLabel App (the datacom app has no density setting)

1. Tap the [gear] icon at the bottom right corner and adjust to +3.

3.50-8.00

For LW-PX900, LW-PX750 & LW-PX700

5.80-10.40

Print density is automatically set. No further settings are necessary.

5.80-10.40

Surface Mounting

5.80-10.40

1. Place the tube over the wire or cable.

7.70-12.50

2. Blow hot air across the tube using a heat gun* to shrink the tube.

7.70-12.50

3. When the tube ts snugly against the surface, the shrinking process is nished.

DO NOT OVER HEAT THE SHRINK TUBE MATERIAL.

11.70-19.50

* Use a heat gun when performing the heat shrinking process in order to

11.70-19.50

achieve proper shrinking levels.

All Shrink Tube 96"

 Use only a heat gun that meets industrial standards during the heat shrinking process. Use caution when

handling the heat gun.

 Do not use soldering irons, cigarette lighters, an open ame or home hair dryers to avoid the accidental

ignition of a re.

 Do not apply heat to any surface for an extended period of time, even when the operating temperature

is within the recommended range.

 Coloring of the tube may be altered, characters may disappear, and surfaces may be damaged or

discolored depending on the construction of the surface, the environmental conditions and the

conditions during adhesion.

Please select an unnoticeable location for testing the actual results of the product prior to use.

 Avoid surfaces that do not provide su cient heat resistance. Heat shrinking can damage surfaces that

are not conducive to high temperatures.

 Avoid direct contact with the tubes during or immediately after shrinking to prevent injuries.

P: 715-247-4440 or 800.622.6312 F: 715-247-4003 or 800.522.9108

[email protected]

K-Sun Corporation, 370 SMC Drive, PO Box 309, Somerset WI 54025

| www.labelworks.epson.com

413762600