- ページ 26

カーナビゲーションシステム TomTom LINK 530のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。TomTom LINK 530 40 ページ。

Resetting the LINK 530

If your LINK 530 does not operate properly or

reset the unit. Only restart or reset the LINK 530 after you have made sure you have carried out all

previously described steps without success.

To restart your LINK 530, press the reset button with a thin pointed object until it clicks and keep it

pressed down for 1 to 2 seconds. The LINK 530 restarts immediately after releasing the button.

If restarting the device does not succeed remove the power cable from the LINK 530. Then plug it

into the power cable connector again.

To reset the LINK 530 to factory settings, press the reset button with a thin pointed object until it

clicks and keep it pressed for 4 to 8 seconds. The LINK 530 reboots immediately after releasing the

reset button.

Important: All information stored on the LINK 530 is deleted during a factory reset.

If resetting the device does not succeed, do the following:

1. Remove the power cable from the device.

2. Press the reset button with a thin pointed object until it clicks and keep it pressed.

3. Insert the power cable while keeping the reset button pressed for 4 to 8 seconds.

You can count the seconds with the help of the flashing of the green LED, that flashes once

per second.

The LINK 530 reboots immediately after releasing the reset button.

signals a system error

you may need to restart or