- ページ 9

プリンターアクセサリー Epson LQ-570eのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Epson LQ-570e 12 ページ。 Epson serial impact dot matrix printers
Epson LQ-570e にも： 製品情報マニュアル (8 ページ), クイック・リファレンス・マニュアル (15 ページ), 製品情報マニュアル (18 ページ), 仕様 (2 ページ), 組立マニュアル (8 ページ), 製品サポート速報 (16 ページ), リファレンス・マニュアル (34 ページ)

ページを印刷する
Epson LQ-570e マニュアル

Changing Settings Through the Default Setting Mode

The LQ-570e includes a Default Setting mode which lets you set
the functions controlled by DIP switch settings on the LQ-570+,
plus a number of additional features. The table below summarizes
the differences. (Default settings are in bold.) To enter the Default
Setting mode, make sure the printer is off and paper is loaded.
Then hold down the Font button and press the power switch to
turn on the printer. Instructions are printed which you can follow
to change any settings. When you are finished, turn off the printer
to exit the Default Setting mode.
Note:
You can also change the default settings using the EPSON Remote!
utility. See Chapter 5 in your LQ-570e User's Guide .
Setting
Page length for
continuous paper
(tractor)
Skip over
perforation
Auto tear-off
Auto line feed
Print direction
Software (printer
mode)
0 slash
High speed draft
I/F mode
Auto I/F wait time
Parallel I/F
bidirectional mode
Packet mode (IEEE
1284.4 protocol)
LQ-570+
DIP switches 2-1 and 2-2
select 8.5, 11, 11.7, and 12
inches
DIP switch 1-8 (On, Off)
DIP switch 2-3 (On, Off)
DIP switch 2-4 (On, Off)
DIP switch 1-5 (Bi-D, Uni-D)
DIP switch 1-6
(ESC/P2, IBM emulation)
not available
not available
not available
not available
not available
not available
LQ-570e (Default
Setting mode)
Length in inches: 3, 3.5, 4,
5.5, 6, 7, 8, 8.5, 11, 70/6, 12,
14, 17
On, Off
On, Off
On, Off
Auto, Bi-D, Uni-D
ESC/P 2, IBM
®
2390 Plus
On:
0
, Off: 0
On, Off
Auto, Parallel, Optional
10 seconds, 30 seconds
On, Off
Auto, Off
9