- ページ 31

プリンターアクセサリー Epson LQ-590のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Epson LQ-590 48 ページ。 24pin dot matrix printers
Epson LQ-590 にも：マニュアル (11 ページ), クイック・リファレンス (12 ページ), 技術概要 (7 ページ), 仕様 (2 ページ), 仕様 (2 ページ), 仕様 (4 ページ), ここからスタート (2 ページ)

ページを印刷する

To load a single card, follow the

instructions in "Loading Single

Sheets with the Paper Guide" on

page 26. To load multiple cards,

see the Reference Guide.

Note:

When you are loading

postcards long edge first,

always load them in the top

slot.

When loading A6 size cards,

always load them long edge

first.

Before printing, turn on the card mode by pressing the Tear Off/Bin

button several times until the left Tear Off/Bin light is on.

Using the Micro Adjust Function

The Micro Adjust function allows you to move the paper forward or

backward in 1/180-inch (0.141 mm) increments to adjust the tear-off and

top-of-form positions.

Adjusting the tear-off position

If your paper's perforation is not aligned with the tear-off edge, you can

use the Micro Adjust function to move the perforation to the tear-off

position, as described below. Your tear-off position setting remains in

effect until you change it, even if you turn off the printer.

Caution:

Never use the knob to adjust the tear-off position; this may damage the

printer or cause it to lose the tear-off position.

Paper Handling