- ページ 20
プリンターアクセサリー Epson P6000 - Multimedia Photo ViewerのPDF 製品サポート速報をオンラインで閲覧またはダウンロードできます。Epson P6000 - Multimedia Photo Viewer 28 ページ。 Surecolor p-series
Epson P6000 - Multimedia Photo Viewer にも： 製品サポート速報 (17 ページ), パンフレット＆スペック (6 ページ), 基本操作マニュアル (29 ページ), 取扱説明書 (46 ページ), 使用方法 (2 ページ)
ページを印刷する
Steps:
1. Install a blank memory card into a memory card reader/writer and copy the
"PSV5FIRM" folder (including all the files in the folder) to the root directory of the
memory card.
2. Verify that the battery is installed in the P-6000 or P-7000 viewer.
3. Connect the AC adapter to the viewer, but do not power it on.
4. After the firmware file has been copied to the memory card, insert the CompactFlash or
SD memory card into the viewer.
5. Press and hold down the "OK" and
shown below.
Warning:
Do not turn off the viewer or attempt to remove the battery or disconnect the
AC adapter at any time during the firmware update.
When you see the EPSON logo name, release the OK and
update will begin and take approximately 3.5 minutes to complete. The SubCPU
firmware update starts next and takes about 3.5 minutes to complete. During the
SubCPU firmware update, the blue activity LED will temporarily stop blinking; this is
normal. Once the firmware update is completed you should see this screen.
keys while sliding the "POWER" switch as
Page 3 of 4
PSB.2009.09.002
keys; the main firmware