- ページ 15

セキュリティセンサー Crow EDS-2000のPDF 取付説明書＆ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Crow EDS-2000 20 ページ。 Outdoor pir + mw detector
Crow EDS-2000 にも：取付説明書＆ユーザーマニュアル (20 ページ)

ページを印刷する

1. Settings & Adjustments

Operation

Note! Connect the EDS-2000 to a positive Voltage output of 9.6 -16VDC source.

Use only a listed power limited source.

The detector shall be provided with minimum of 4 hours of standby power from either a

listed compatible control unit or power supply.

The detector is automatically operated once connected to power.

The LED's start flashing one at a time (side to side) for 30 seconds during the warm-up

period and after that it will turn off.

At this time the detector is ready for operation.