EPSON Stylus Photo R300 Series
When you need new ink cartridges, contact your dealer or call
the EPSON Store at (800) 873-7766 or visit
www.epsonstore.com (U.S. sales only). In Canada, please call
(800) 463-7766 for dealer referral.
Removing and Installing Ink Cartridges
Be sure you have a new ink cartridge before you begin. Once
you start the ink cartridge replacement procedure, you must
complete all the steps in one session.
1. Make sure the printer is turned on and not printing, then
open the printer cover.
2. Do one of the following:
❏ If the red b error light is on (cartridge is empty), press
the b maintenance button.
❏ If the red b error light is flashing (cartridge is low),
press the b maintenance button. You see
highlighted in the Advanced Settings
Replacement
menu. Press
.
OK
❏ If the
b
error light is off, press the
choose
More Options
button to select
3. You see a message on the display telling you that ink
cartridge replacement will begin. Press
print head moves to the replacement position.
4. Open the cartridge cover.
5. Press in the tab on the back of the cartridge and lift the
cartridge out of the printer. Dispose of it carefully.
EPSON Stylus Photo R300 Series
10 -
Ink Cartridge
button to
, then press
. Press the
OK
Ink Cartridge Replacement
to continue. The
OK
Keep ink cartridges out of the reach of children and do
not drink the ink.
If ink gets on your hands, wash them thoroughly with
soap and water. If ink gets in your eyes, flush them
thoroughly with water.
6. Unwrap the new ink cartridge.
Don't touch the green circuit boards or remove any
labels.
7. Lower the cartridge into the holder, with the green circuit
board facing the front. Then gently push the cartridge down
until it is firmly seated.
.
8. If you need to replace another ink cartridge, repeat steps 5
through 7 before continuing with step 9.
9. Close the cartridge cover.
10. Press the left front corner of the cartridge cover forward to
lock the cover into place.
11. Press
OK
The printer begins charging the ink delivery system.
12. When you see a message that charging is complete (after
about a minute), press
10/03
and close the printer cover.
to finish.
OK
ページを印刷する