- ページ 31
プリンターアクセサリー Epson RX620 - Stylus Photo Color InkjetのPDF 基本操作マニュアルをオンラインで閲覧またはダウンロードできます。Epson RX620 - Stylus Photo Color Inkjet 45 ページ。 Epson scan icm updater v1.20 (psb.2008.07.001)
Epson RX620 - Stylus Photo Color Inkjet にも： 仕様 (2 ページ), スタート・ヒア・マニュアル (8 ページ), 更新 (1 ページ), 製品情報マニュアル (19 ページ), 取扱説明書 (4 ページ)
ページを印刷する
Maintenance and
Transporting
Checking the Print Head
Nozzles
If you find that the printed image is unexpectedly
faint or some dots in the printed image are missing,
checking the print head nozzles helps you to identify
the problem.
1.
Make sure that A4 paper is loaded in the sheet
feeder and press the Setup button.
2.
Select Nozzle Check.
3.
Confirm the messages on the LCD panel, then
press the OK button to start the nozzle check.
4.
Check the printout.
Good: print head does not need to be cleaned
yet.
Not Good: print head needs to be cleaned.
The actual printouts are printed in color (CMYK).
If the nozzle check result is not good, there may be a
clogged ink nozzle or a misaligned print head. To
solve these problems, press the OK button and
follow step 3 and 4 in "Cleaning the Print Head" of
the next section.
If the nozzle check result is good, press the Cancel
button to return to the Setup menu.
Cancel
OK
Cleaning the Print Head
If you find that the nozzle check result is
unexpectedly faint or some dots in the printed image
are missing, you may be able to solve these problems
by cleaning the print head, which ensures that the
nozzles are delivering ink properly.
Note:
❏ Print head cleaning uses both color and black ink. To
avoid wasting ink, clean the print head only if the copy
quality drops (for example, blurred printout,
incorrect or missing color).
❏ Before cleaning the print head, perform the nozzle
check first to see if it really needs to be cleaned. This
saves ink.
❏ When a message appears on the LCD panel to prompt
you to replace the ink cartridge or to indicate the ink
is low, you cannot clean the print head. In this case,
replace the appropriate ink cartridge first.
Press the Setup button.
1.
2.
Select Head Cleaning.
3.
Confirm the messages on the LCD panel, then
press the OK button to start head cleaning.
4.
When Print head cleaning in progress.
Please wait. disappears from the LCD panel,
perform the nozzle check to confirm that the
head is clean and to reset the cleaning cycle. See
"Checking the Print Head Nozzles" of the
previous section.
Caution:
c
Never turn off this product while Head
cleaning in progress. Doing so may damage
this product.
Note:
❏ If the print quality has not improved after
repeating this procedure four or five times, turn
this product off and leave it alone overnight.
Then, perform the nozzle check again and repeat
head cleaning if necessary.
❏ If the print quality still has not improved, one or
both of your ink cartridges may be old or damaged
and may need to be replaced. To replace an ink
cartridge, see "Replacing Ink Cartridges" on
page 29.
❏ To maintain good print quality, we recommend
printing a few pages at least once every month.
Maintenance and Transporting
Cancel
OK
31