- ページ 6

プリンターアクセサリー Epson Stylus Color 400のPDF クイック・セットアップ・マニュアルをオンラインで閲覧またはダウンロードできます。Epson Stylus Color 400 13 ページ。 Ms windows 3.x color printer drivers problems
Epson Stylus Color 400 にも：ユーザーマニュアル (29 ページ), 仕様書 (2 ページ), 製品情報シート (4 ページ), マニュアル (12 ページ), マニュアル (13 ページ), 製品情報マニュアル (12 ページ), 製品サポート速報 (6 ページ), 製品サポート速報 (4 ページ)

Note:

The printer is assigned to

parallel port LPT1; if you

want to use a different

port, see your Windows

documentation for

instructions.

Check the Printer

1. Turn off the printer.

2. While holding down the

printer. Then release the buttons.

3. A page prints out showing the ROM version and a

multicolor nozzle check pattern consisting of staggered

horizontal and straight vertical lines. When it's finished,

turn off the printer.

If you have any problems with the printer check, see

Chapter 5 of your User's Guide for solutions.

You'll need a shielded parallel cable to connect the printer. For

a complete list of system requirements, see the Introduction of

your User's Guide.

1. Turn off the printer and your computer.

2. Connect the cable to the printer's parallel interface; then

squeeze the wire clips together until they lock in place. (If

your cable has a ground wire, connect it now.)

3. Connect the other end of the cable to your computer's

parallel port and secure it as necessary.

load/eject button, turn on the

ground

wire