- ページ 6

プリンターアクセサリー Epson Stylus Color 440のPDF 製品情報をオンラインで閲覧またはダウンロードできます。Epson Stylus Color 440 13 ページ。 Color ink jet printer
Epson Stylus Color 440 にも：ユーザーマニュアル (34 ページ), ユーザーマニュアル (38 ページ), ユーザーマニュアル (35 ページ), 製品情報シート (4 ページ), スタート・ヒア・マニュアル (6 ページ), 製品情報シート (4 ページ), 仕様 (2 ページ), セットアップと日常使用 (45 ページ)

ページを印刷する

EPSON Stylus COLOR 440

Installing an Ink Cartridge for the First

Time

1. Plug the power cord into a grounded outlet.

Caution:

Don't use an outlet controlled by a wall switch or timer,

or one that uses the same circuit as a large appliance.

This may disrupt the power, which can erase the

printer's memory or damage its power supply.

2. Remove the ink cartridges from their foil packages. Then

pull off only the yellow part of the tape seal on the top of

each cartridge. It is okay if a bit of the yellow tape remains

on the cartridge. Do not pull off the blue part.

Caution:

You must remove the yellow tape seal from the top of

the cartridge or you will permanently damage it. Don't

remove the tape seal from the bottom.

black cartridge

Warning:

If ink gets on your hands, wash them thoroughly with

soap and water. If ink gets in your eyes, flush them

immediately with water.

3. Lower the output tray and open the printer cover.

4. Press the P power button to turn on the printer. The

P power light flashes, the B black and A color ink out

lights come on, and the ink cartridge holders move left to

the installation position.

Caution:

Always use the

power button to turn the printer on or

off. Never use an external switch, such as a power strip.

6 - EPSON Stylus COLOR 440

remove

color cartridge

5. Pull up the two ink cartridge clamps.

6. Insert the ink cartridges into their holders with the blue

labels facing up and toward the back of the printer.

7. Push down the clamps until they lock in place.

8. Press the R cleaning button and close the printer cover.

The printer moves the print head and begins charging the ink

delivery system. Charging can take two to three minutes.

During this time, the P power light flashes, and the printer

makes various sounds. Don't turn off the printer or interrupt

the charging process or you'll use more ink than necessary.

Charging is complete when the P power light stops flashing

and is stays on.

Caution:

Never turn off the printer when the

flashing, unless the printer hasn't moved or made any

noise for more than five minutes.

7/98

power light is