- ページ 8

プリンターアクセサリー Epson Stylus Color 480SXUのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Epson Stylus Color 480SXU 11 ページ。 Windows printer software does not install
Epson Stylus Color 480SXU にも：日常使用マニュアル (24 ページ), 製品情報シート (4 ページ), パンフレット (2 ページ), 製品サポート速報 (1 ページ)

ページを印刷する

EPSON Stylus Color 480SXU

4. When cleaning is finished, run a nozzle check to confirm

the print head nozzles are clean. Click Print Nozzle

Check Pattern.

5. Make sure letter-size or larger paper is loaded in the printer.

Then follow the instructions on the screen.

6. See page 7 for details on examining the nozzle check

pattern. If the pattern isn't missing any dots, click Finish.

If any dots are missing, click Clean and follow the

instructions on the screen to clean the print head again.

If you don't see any improvement after cleaning three or four

times, check the solutions in your Printer Basics book. You can

also turn the printer off and wait overnight—this allows any

dried ink to soften—and then try cleaning the print head

again.

Aligning the Print Head

If your printouts contain jagged characters or misaligned

vertical lines, you may need to align the print head. Your

printer must be connected directly to your computer, not

connected over a network, to use the Print Head Alignment

utility. Follow these steps:

1. Make sure the printer is plugged in but not printing, and

letter-size or larger paper is loaded.

For the best results, load EPSON ink jet paper in the

printer whenever you check the print head alignment.

Don't use plain, recycled, or photocopier paper.

2. Right-click the

Status Monitor 3 icon on your

Windows taskbar, then select Print Head Alignment on

the menu that appears.

Or, if you have an application running, you can also run the

utility by accessing the printer settings dialog box as

described in your Printer Basics book. Click the Utility tab,

then click the Print Head Alignment button.

3. Click Next to print an alignment page. You see this

window:

EPSON Stylus Color 480SXU

4. On the printed page, select the pattern that shows the two

vertical lines most precisely printed on top of each other.

Select one pattern each for rows 1, 2, and 3.

5. Enter the number of the best pattern for each row in the

corresponding boxes on the screen and click Finish.

If there isn't a precisely aligned pattern, enter the numbers

of the best aligned patterns in each row and click

Realignment. Another alignment page prints with your

selections printed as patterns numbered 8. Repeat steps 4

and 5 to select a more precise pattern for each row.

Cleaning the Printer

To keep your printer working at its best, you should clean it

several times a year. Follow these steps:

1. Unplug the printer's power cord and disconnect the printer

cable.

2. Remove all the paper from the sheet feeder.

3. Clean the exterior of the printer with a soft, damp cloth.

4. Clean ink out of the printer's interior with a soft, damp

cloth.

Don't touch the gears inside the printer.

Never use a hard or abrasive brush, or alcohol or thinner

for cleaning; they can damage the printer components

and case.

Don't get water on the printer components and don't

spray lubricants or oils inside the printer.

Don't use any cleaning sheets included with special

media; they may jam inside the printer.

9/00