- ページ 10

プリンターアクセサリー Epson Stylus Color 660のPDF 製品情報をオンラインで閲覧またはダウンロードできます。Epson Stylus Color 660 11 ページ。 Color ink jet printer
Epson Stylus Color 660 にも：ユーザーマニュアル (34 ページ), 製品情報シート (4 ページ), 仕様書 (2 ページ), 製品情報シート (4 ページ), スタート・ヒア・マニュアル (20 ページ), サービスマニュアル (40 ページ)

ページを印刷する

EPSON Stylus COLOR 660

Aligning the Print Head

If your printouts contain vertical banding or jagged vertical

lines, you may need to align the print head. To use the print

head alignment utility, your printer must be connected to a

local port, not through a network.

Tip:

For best results, use EPSON ink jet paper or photo quality paper

whenever you check the print head alignment.

Follow these steps:

1. Make sure the printer is turned on and paper is loaded.

2. Click

, point to

Start

Settings

3. Right-click the

EPSON Stylus COLOR 660

window.

Printers

4. Select

(

Properties

Document Defaults

5. Click the

tab. You see the Utility menu.

Utility

6. Click the

Print Head Alignment

7. Follow the instructions on the screen to print a test page.

8. Select the most precise alignment pattern from the printed

choices on the test page. Enter the number of the best

aligned pattern following the instructions on the screen.

Cleaning the Printer

To keep your printer working at its best, you should clean it

several times a year, following these steps:

1. Turn off the printer, unplug the power cord, and

disconnect the printer cable.

2. Remove all the paper from the sheet feeder.

3. Clean the exterior of the printer with a soft, damp cloth.

4. Clean ink out of the printer's interior with a soft, damp

cloth.

Don't touch the gears inside the printer.

Never use alcohol or thinner for cleaning; they can

damage the printer components and case.

Don't get water on the printer components.

Don't spray lubricants or oils inside the printer.

Don't use any cleaning sheets included with special

media; they may jam inside the printer

10 - EPSON Stylus COLOR 660

, and then select

Printers

icon in the

in Windows NT).

button.

Transporting the Printer

If you want to move your printer some distance, you need to

prepare it for transportation and repack it in the original box.

To avoid damage, always leave the ink cartridges

installed when transporting the printer.

After you unpack your printer, be sure to remove the tape

used in step 4 before printing.

Follow these steps:

1. Turn on the printer and wait until the print head locks in

the far right position. Then turn off the printer.

2. Unplug the power cord from the electrical outlet. Then

disconnect the interface cable from the printer.

3. Remove any paper from the sheet feeder and remove the

paper support.

4. Open the printer cover. Secure the ink cartridge holder to

the printer with tape as shown, then close the printer cover.

5. Push in the output tray extensions and close the tray.

6. Repack the printer and attachments in the original box

using the protective materials that came with it. See the

unpacking sheet that was packed with the printer.

Be sure to keep the printer flat as you transport it. If you

notice a decline in print quality after transporting the printer,

clean the print head; if output is misaligned, align the print

head.

- ページ 10

Aligning the Print Head

Cleaning the Printer

Transporting the Printer

Related Documentation