- ページ 5

プリンターアクセサリー Epson Stylus Color 670のPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Epson Stylus Color 670 17 ページ。 Product support bulletin(s)
Epson Stylus Color 670 にも：製品情報シート (4 ページ), 製品情報シート (4 ページ), 製品サポート速報 (6 ページ), 製品サポート速報 (1 ページ), 仕様 (2 ページ), 製品情報 (12 ページ), 製品サポート速報 (3 ページ), 製品サポート速報 (2 ページ), 製品サポート速報 (4 ページ), 製品サポート速報 (7 ページ)

ページを印刷する

If you are using the floppy disk version of the software, make a backup copy

of the EPSON printer software disk before you begin installation. If you

wish to make a floppy disk version of the printer software on your CD-

ROM, you can use the driver disk creation utility included on the CD.

Installing in Windows

Follow these steps to install your printer software.

Make sure that your printer is off.

Turn on your computer and start Windows. If the New Hardware

Found screen or any other Wizard appears, click Cancel.

Insert the printer software CD shipped with your printer in the CD-

ROM drive. The Installer dialog box appears. (For floppy disk users,

insert the disk in a disk drive and double-click the My Computer icon,

then the floppy disk drive icon, and then Setup.exe.)

Double-click Install Printer Driver/Utility, then click OK in the dialog box

that appears to start the printer software installation.

Follow the on-screen instructions to turn on your printer.

For Windows 98 users, the printer port configuration starts

automatically.

For printers connected via USB cable, the USB device driver installation

starts automatically at this point. A message will appear asking you to

restart your computer. Follow this instruction.

After turning on the printer, the Setup utility opens automatically.

Follow the on-screen instructions to install the ink cartridges, check the print head nozzles, and clean the print head. When a message appears informing you that the setup is complete, click OK.

Nagano, Japan.

Printed in Japan.xx-xx