プリンターアクセサリー Epson Stylus Color 740のPDF クイック・セットアップ手順をオンラインで閲覧またはダウンロードできます。Epson Stylus Color 740 5 ページ。 Product support bulletin(s)
Epson Stylus Color 740 にも：製品情報シート (4 ページ), パンフレット (2 ページ), 製品情報シート (4 ページ), 製品サポート速報 (6 ページ), 製品サポート速報 (1 ページ), 製品情報マニュアル (17 ページ), ユーザーマニュアル (24 ページ), ソフトウェア・インストール・マニュアル (8 ページ), 仕様 (2 ページ), 製品サポート速報 (3 ページ), 製品サポート速報 (2 ページ), 製品サポート速報 (4 ページ), 製品サポート速報 (7 ページ), オンラインマニュアル (10 ページ)

ページを印刷する

Set up the printer

1 Unpack the Printer

Remove any tape and packing material from the printer as

described on the Unpacking Sheet in the printer box.

Make sure you've got a cable to connect the printer to your

computer and these items:

paper support

black ink cartridge

printer

Printer

Basics book

Place the printer near your computer and an available

grounded outlet, but avoid areas:

with high temperature or humidity

in direct sunlight or dusty conditions

near sources of heat or electromagnetic interference,

such as a cordless telephone base unit

Also be sure to check the System Requirements and follow

all the Safety Instructions in your Printer Basics book.

Note:

If you need help as you set up your printer, see

"Problems? Need Help?" in the Printer Basics

book.

color ink cartridge

printer software

CD-ROM

EPSON

media pack

2 Put on the Paper Support

Insert the paper support into the slots at the back of the

printer's sheet feeder.

3 Install the Ink Cartridges

1. Plug the printer's power cord into a grounded outlet.

Caution:

Don't use an outlet that can be turned off by

a wall switch or timer, or one on the same

circuit as a large appliance. This may disrupt

the power, which can erase the printer's

memory or damage its power supply.

2. Remove the ink cartridges from their packages. Then

remove only the yellow part of the tape seal on top,

as shown. Don't pull off the blue portion or remove

the clear seal on the bottom of the cartridge.

black car tridge

Caution:

Use the ink cartridges packed with your

printer the first time you install them or your

printer won't charge ink properly. You must

remove the yellow tape seal from the

cartridge or you will permanently damage it.

Don't try to remove the clear seal from the

bottom of the cartridge; ink will leak out.

color cartridge

Open to continue