- ページ 6

プリンターアクセサリー Epson Stylus Color 850のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Epson Stylus Color 850 13 ページ。 Color inkjet printer
Epson Stylus Color 850 にも：ユーザーマニュアル (34 ページ), ユーザーマニュアル (38 ページ), カートリッジ交換 (2 ページ), 製品情報シート (4 ページ), 仕様 (1 ページ), スタート・ヒア・マニュアル (6 ページ), 商品説明 (20 ページ)

ページを印刷する

EPSON Stylus COLOR 850

Control Panel

black cleaning

button

color cleaning

button

Follow these guidelines when the control panel lights come on

or flash:

When the paper out light flashes , paper is jammed in

the printer. Turn off the printer and gently pull out all

paper. Then press the

When the paper out light comes on , your paper ran

out or is incorrectly loaded. Load paper in the feeder

and then press the

B A

When an ink out light flashes , your ink supply is low.

Make sure you have a replacement cartridge.

B A

When an ink out light comes on , you need to replace

the ink cartridge.

P S B A

When the power light and paper out light flash and all

the other lights are on, your printer has a carriage

error.

P S B A

When all the lights flash , your printer may have an

internal error.

Testing the Printer

You can run a self test to determine whether the problem

comes from the printer itself or some other source.

If the results are satisfactory, the problem lies in your

software settings, the interface cable, or your computer.

If the self test does not print correctly, you have a problem

with your printer.

Follow these steps to run the test:

1. Make sure both the printer and computer are turned off.

2. Disconnect the interface cable from the printer.

3. Make sure paper is loaded in the printer.

Caution:

Load paper that's at least 8.27 inches (210 mm) wide. This

prevents ink from spraying inside the printer and smudging your

printouts.

6 - EPSON Stylus COLOR 850

paper out light

black ink out light

color ink out light

load/eject button

power button

power light

load/eject button.

4. Hold down the

button. Hold down the buttons until the

starts to flash, then release them.

5. The printer prints a nozzle check pattern (shown on

page 10) and samples of fonts and colors.

6. To end the test, turn off the printer. Then reconnect the

interface cable and turn on your printer and computer.

Using Hex Dump Mode

You can use the printer's hex dump mode to identify problems

if you know how to interpret hex code. Follow these steps:

1. Make sure the printer is turned off and has paper loaded

in it.

2. Open the cover.

3. Hold down the

cleaning button and press the

prints Hex Dump Mode at the top of a page and then

stops.

4. Print one or more pages from an application as usual. The

printer prints the exact code it receives in hexadecimal

format.

5. Turn off the printer to exit hex dump mode.

Installing Ink Cartridges for the

First Time

Follow these steps to install the ink cartridges that came in the

box with the printer for the first time:

1. Make sure the printer is turned off (the

should be up). Then plug the printer's power cord into a

grounded outlet.

Caution:

Always use the

power button to turn the printer on or off. Never

use an external switch—such as a power strip switch—to turn off

the printer.

Don't use an outlet that can be turned off by a wall switch or timer,

or one that uses the same circuit as a large appliance. This may

disrupt the power, which can erase memory or even damage the

printer's power supply.

3/98

oad/eject button and press the

power light

load/eject button and the

power button. The printer

power button

power

color