- ページ 6
計測機器 Crowcon Clip+のPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。Crowcon Clip+ 15 ページ。 Fixed life single gas monitor
ページを印刷する1. Activation
1. Activation
1. Activation
To activate the Crowcon Clip or Clip+, press and hold down the button for approximately 5 seconds. On
To activate the Crowcon Clip or Clip+, press and hold down the button for approximately 5 seconds. On
To activate the Crowcon Clip or Clip+, press and hold down the button for approximately 5 seconds. On
activation the personal monitor will vibrate, flash red LED's, and sound the audible alarm. A successful
activation the personal monitor will vibrate, flash red LED's, and sound the audible alarm. A successful
activation the personal monitor will vibrate, flash red LED's, and sound the audible alarm. A successful
activation will display the life remaining in months on the screen of the personal monitor as 24 months.
activation will display the life remaining in months on the screen of the personal monitor as 24 months.
activation will display the life remaining in months on the screen of the personal monitor as 24 months.
1.1. Display Details
1.1. Display Details
1.1. Display Details
The personal monitor utilises a special high viewing angle LCD that is designed to enhance the screen
The personal monitor utilises a special high viewing angle LCD that is designed to enhance the screen
The personal monitor utilises a special high viewing angle LCD that is designed to enhance the screen
visibility. In the absence of gas, it displays life remaining. In those cases where gas is present, the
visibility. In the absence of gas, it displays life remaining. In those cases where gas is present, the
visibility. In the absence of gas, it displays life remaining. In those cases where gas is present, the
display will automatically shift to a display that shows gas concentration and a battery icon.
display will automatically shift to a display that shows gas concentration and a battery icon.
display will automatically shift to a display that shows gas concentration and a battery icon.
*Note the displayed number can be changed in the IR
*Note the displayed number can be changed in the IR
*Note the displayed number can be changed in the IR
Link software with the "Show Sensor Readings" and
Link software with the "Show Sensor Readings" and
Link software with the "Show Sensor Readings" and
"Hide Clock" user options.
"Hide Clock" user options.
"Hide Clock" user options.
Warning: Users must familiarize themselves with the
Warning: Users must familiarize themselves with the
Warning: Users must familiarize themselves with the
icons in both non-alarm and alarm states
icons in both non-alarm and alarm states
icons in both non-alarm and alarm states
Warning: If the display is missing icons or cannot be
Warning: If the display is missing icons or cannot be
Warning: If the display is missing icons or cannot be
clearly read, please contact Crowcon or your local
clearly read, please contact Crowcon or your local
clearly read, please contact Crowcon or your local
registered outlet immediately
registered outlet immediately
registered outlet immediately
1.2. Day to Day Usage
1.2. Day to Day Usage
1.2. Day to Day Usage
Prior to daily use, the personal monitor will prompt the
Prior to daily use, the personal monitor will prompt the
Prior to daily use, the personal monitor will prompt the
user to perform a self test by showing the test reminder
user to perform a self test by showing the test reminder
user to perform a self test by showing the test reminder
icon, this process is a simple and effective way to ensure
icon, this process is a simple and effective way to ensure
icon, this process is a simple and effective way to ensure
safe operation of the personal monitor. During the "Self
safe operation of the personal monitor. During the "Self
safe operation of the personal monitor. During the "Self
Test" the audio, visual, and vibrating alarms are activated
Test" the audio, visual, and vibrating alarms are activated
Test" the audio, visual, and vibrating alarms are activated
and the sensor is tested. Below is a step by step process for performing the test:
and the sensor is tested. Below is a step by step process for performing the test:
and the sensor is tested. Below is a step by step process for performing the test:
Screen Display Detail
Screen Display Detail
Screen Display Detail
Screen 1:
Screen 1:
Screen 1:
When the "Test" Icon appears in the upper left hand corner, a self test is required.
When the "Test" Icon appears in the upper left hand corner, a self test is required.
When the "Test" Icon appears in the upper left hand corner, a self test is required.
Press the button on the front of the personal monitor to perform the test.
Press the button on the front of the personal monitor to perform the test.
Press the button on the front of the personal monitor to perform the test.
Screen 2:
Screen 2:
Screen 2:
After pressing the button the following screen will appear. During the self test
After pressing the button the following screen will appear. During the self test
After pressing the button the following screen will appear. During the self test
ensure that the following occurs: (1) The personal monitor emits one audible beep,
ensure that the following occurs: (1) The personal monitor emits one audible beep,
ensure that the following occurs: (1) The personal monitor emits one audible beep,
all LED's light up, and the vibrate function is activated
all LED's light up, and the vibrate function is activated
all LED's light up, and the vibrate function is activated
(2) All LCD display elements appear.
(2) All LCD display elements appear.
(2) All LCD display elements appear.
Screen 3:
Screen 3:
Screen 3:
After the full element LCD screen, the low alarm and high alarm set points will be
After the full element LCD screen, the low alarm and high alarm set points will be
After the full element LCD screen, the low alarm and high alarm set points will be
displayed. Note these alarm set points can be adjusted using the IR Link or Clip C-
displayed. Note these alarm set points can be adjusted using the IR Link or Clip C-
displayed. Note these alarm set points can be adjusted using the IR Link or Clip C-
Test configuration options.
Test configuration options.
Test configuration options.
See section
See section
See section
Screen 7: (see Sections 4-6 for additional screen displays)
Screen 7: (see Sections 4-6 for additional screen displays)
Screen 7: (see Sections 4-6 for additional screen displays)
When a self test is successful the personal monitor will turn to the original screen
When a self test is successful the personal monitor will turn to the original screen
When a self test is successful the personal monitor will turn to the original screen
and display a check mark in place of where the test icon was previously displayed
and display a check mark in place of where the test icon was previously displayed
and display a check mark in place of where the test icon was previously displayed
and one short audible beep will sound. The personal monitor will by default prompt
and one short audible beep will sound. The personal monitor will by default prompt
and one short audible beep will sound. The personal monitor will by default prompt
another "Self Test" in 20 hours from when the button was pressed. Note this value
another "Self Test" in 20 hours from when the button was pressed. Note this value
another "Self Test" in 20 hours from when the button was pressed. Note this value
can be changed via the IR Link software anywhere from 8 to 20 hours. See the IR
can be changed via the IR Link software anywhere from 8 to 20 hours. See the IR
can be changed via the IR Link software anywhere from 8 to 20 hours. See the IR
Link Quick Reference Guide for further detail.
Link Quick Reference Guide for further detail.
Link Quick Reference Guide for further detail.
Issue 4 – December 2016
Issue 4 – December 2016
Issue 4 – December 2016
5.2
5.2
5.2
for standard set points
for standard set points
for standard set points
Page 5
Page 5
Page 5