- ページ 7
試験装置 Crowcon C-TestのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Crowcon C-Test 12 ページ。 Gas (bump) test and calibration station for use with the crowcon clip and crowcon clip+
ページを印刷するCrowcon C-Test User Manual
The first line is for the C-Test and the overall results for each test:
Date: Date and Time of Test
Test: Type of Test (Calibration, Bump Test, Turn Off (for Clip+ only)
C-Test: Model Number
Serial Number: Individual serial number for C-Test station
Overall Result: Pass/Fail
C-Test F/W version: C-Test station firmware version
C-Test H/W version: C-Test station hardware version
Location: This field can be programmed via the C-Test Manager program to show a location for
the C-Test.
The second line and third lines are unique to each monitor and will appear for each test:
Detector: Crowcon Clip or Crowcon Clip+
Serial: Serial Number for each detector
Result: Pass/Fail
Unit F/W Version: Firmware version of the individual monitor
Audio: Pass/Fail
Visual: We do not test the visual alarm during the test; this will always display an X. Visual
alarms can be verified with the daily self test.
Num Sensors: Number of sensors in the instrument, this should always display 1
Show Sensor Readings, Bump Flash Disabled, and Hide Clock: True if enabled; False if not
enabled
User ID: Unique programmable 6 digit number
Self Test Interval: Default is 20 hours; this option can be changed via IR Link or via C-Test
Manager
The Third line(s) are for each sensor on the monitor.
Sensor: Sensor Type (H
Result: Pass/Fail
Reading: Peak unit reading during the test in ppm
Bottle Lot #, Bottle Expiry: Both fields can be programmed via C-Test Manager
Bottle Concentration: Default settings can be found and programmed via C-Test Manager
High Alarm, Low Alarm: Alarm settings of the individual monitor
Calibration Interval and Bump Test Interval: Intervals of the individual monitor
Bump Test Due and Calibration Test Due: Number of days unit scheduled test is due
Issue 1 - June 2012
S, CO, or O
)
2
2
Page 7